Here is the output from the panel at the bottom of the qtractor scteen,
I made the appimage executable, ran it and the following happened,
Session closed.
Session started.
New session: "Untitled1".
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
no message buffer overruns
no message buffer overruns
no message buffer overruns
jackdmp 1.9.12
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2016 Grame.
Copyright 2016-2017 Filipe Coelho.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 20
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init
Acquire audio card Audio0
creating alsa driver ... hw:HDMI,3|hw:HDMI,3|1024|2|44100|0|0|nomon|swmeter|-|32bit
ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
QCommonStyle::drawComplexControl: Control 1 not handled
MIDI connections change.
Audio connections change.
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
I do not know that the above not handled means.
I will load an audio track and see how things go, the qtractor screen has icons
that were not there before, and content when clicked upon.
UPDATE
I shutdown qtractor, restarted jackctl, opened qtractor and have sound.
I still have a blank box when I middle click on a track, not sure why this is,
should there be some dialog or options showing, or is this normal for qtractocr.
I can't seem to add a png of the screen shot, so am struggling to explain.
I also don't understand why the appimage worked, and the dnf install did not.
I also tried to ./configure the latest release from the Qtractor site, that failed too
with an error about not resolving something, it was late and I gave up too.
Here is the output from the panel at the bottom of the qtractor scteen,
I made the appimage executable, ran it and the following happened,
Session closed.
Session started.
New session: "Untitled1".
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
no message buffer overruns
no message buffer overruns
no message buffer overruns
jackdmp 1.9.12
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2016 Grame.
Copyright 2016-2017 Filipe Coelho.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 20
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init
Acquire audio card Audio0
creating alsa driver ... hw:HDMI,3|hw:HDMI,3|1024|2|44100|0|0|nomon|swmeter|-|32bit
ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
QCommonStyle::drawComplexControl: Control 1 not handled
MIDI connections change.
Audio connections change.
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
QCommonStyle::drawComplexControl: Control 1 not handled
I do not know that the above not handled means.
I will load an audio track and see how things go, the qtractor screen has icons
that were not there before, and content when clicked upon.
UPDATE
I shutdown qtractor, restarted jackctl, opened qtractor and have sound.
I still have a blank box when I middle click on a track, not sure why this is,
should there be some dialog or options showing, or is this normal for qtractocr.
I can't seem to add a png of the screen shot, so am struggling to explain.
I also don't understand why the appimage worked, and the dnf install did not.
I also tried to ./configure the latest release from the Qtractor site, that failed too
with an error about not resolving something, it was late and I gave up too.
Hopefully this app image will do the trick