FW Recording with Qtractor .4.7.3

30 November, 2010 - 23:03 — nobody (not verified)

Hello Rui,
I hope you are doing well. I have a few questions for you.

A friend of mine just purchased two Echo Audio AudioFire12 firewire audio units and is using Qtractor and Ardour. There are a few major issues he is having with Qtractor.

1. He is dumping from a 16 track analog tape machine 16 tracks at a time, with a 62ms latency setting. When playing back, none of the tracks are in sync with each other. This appears to work okay in Ardour.

2. When loading a new project after recording, or even when quitting and restarting Qtractor, he has to use Qjackctl to restart jackd, before Qtractor will restart, plus, he has to power down the AudioFire12 units in order to free up jackd before jackd will restart. None of which happens withing Ardour.

He would prefer to use Qtractor because of the MIDI.

Any suggestions as to what to look for? He is using FFADO 2.0.0 using the old firewire stack with the rt-2.6.31 kernel under Fedora 12.

Lexridge

Forums:

qtractor

Add new comment

30 November, 2010 - 23:32 — rncbc

Re: FW Recording with Qtractor .4.7.3

Hi lexridge,

long time no see

all you say seems big trouble indeed.

i will need some more details about your friends setup though, specially about qtractor buses, tracks and respective connections.

what kind or is there a pattern, perceived recording delay perhaps, between consecutive tracks that your friend (or you) can quantify? in other words, how much offset, if any, is needed to apply to each recorded track-clip to make it playback in perfect sync? does that offset seem any regular or progressive with each track, or else? help me understand whats going wrong, please:)

the problem about restarting jackd on each new session seems also a puzzle to me.

which jack version? what happens to jackd when to start a new qtractor session? what error messages are displayed on qjackctl or console output?

seeya

2 December, 2010 - 04:36 — lexridge (not verified)

I believe this to be a firewire issue (FFADO)

Hello Rui, and thank you for your quick reply. It took some time for me to get this info from my friend, and it is quite a lot. I suspected a firewire problem, and gave him a different FW PCI card to try out. It made no difference. However, I think you will agree that this is entirely a firewire issue. It is rather long, I hope that is not a problem.

------ clip ------

Still having issues about the same issues after trying your firewire card. Below is more info and info from jack messages. I have also attach my /var/log messages and dmesg.

On a side note the MIDI in Qtractor in right on. Using the cakewalk ins file format made setting up the patches of my keyboards really quick and easy. I even made an ins file for my Roland VK-8. Couldn't find an ins file for it on the internet. I loaded in a mid file picked the instrument sounds I wanted and it played fine. Be glad when Rui has a chance to add some midi editing bells and whistles.

Here is the Qjackctrl message output when trying to start jackd. Usually the second time it starts.

0:11:56.436 /usr/bin/jackd -dfirewire -r48000 -p1024 -n3 -i24 -o24
20:11:56.447 JACK was started with PID=2121.
20:11:56.660 ALSA connection change.
20:11:56.662 ALSA connection graph change.
no message buffer overruns
no message buffer overruns
jackdmp 1.9.4
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2009 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 60
libffado 2.0.0 built Nov 23 2010 18:12:26
00910739545: [31mWarning (fireworks_session_block.cpp)[ 257] loadFromMemory: size not correct: got 13392, should be -4 according to data
[0m00910887031: [31mWarning (fireworks_session_block.cpp)[ 257] loadFromMemory: size not correct: got 13392, should be -4 according to data
20:12:05.201 Could not connect to JACK server as client. - Overall operation failed. - Server communication error. Please check the messages window for more info.
[0mfirewire ERR: Could not start streaming threads
Cannot start driver
JackServer::Start() failed with -1
Cannot connect to server socket err = Connection refused
Cannot connect to server socket
Cannot connect to the server
no message buffer overruns
Failed to start server
20:12:05.407 JACK was stopped with exit status=255.
20:12:09.784 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
20:12:18.640 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
20:12:36.269 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
20:13:11.525 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started

Here is the Qjackctrl message output when recording in Qtractor. in the result below Qtractor paused for a few seconds and then continued to record I then stopped recording and captured the message below. Have had this message before....

0mfirewire ERR: wait status < 0! (= -1)
JackAudioDriver::ProcessAsync: read error, skip cycle

on previous multitrack recordings with Qtractor recording 15 tracks at one time. On playback some tracks would not be in sync with others. Verified they were recorded that way by importing Qtractor recorded tracks into Ardour. They played back out of sync. Start over and substitute Ardour for Qtractor and the recorded tracks play back fine in Ardour. Have not tried to play back tracks recorded with Ardour in Qtractor. Feel they would play back fine in Qtractor. The problem is on the recording.

ackdmp 1.9.4
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2009 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 60
libffado 2.0.0 built Nov 23 2010 18:12:26
05655442331: [31mWarning (fireworks_session_block.cpp)[ 257] loadFromMemory: size not correct: got 13392, should be -4 according to data
[0m05655568153: [31mWarning (fireworks_session_block.cpp)[ 257] loadFromMemory: size not correct: got 13392, should be -4 according to data
21:31:07.159 Server configuration saved to "/home/karl/.jackdrc".
21:31:07.164 Statistics reset.
21:31:07.181 Client activated.
21:31:07.187 JACK connection change.
21:31:13.620 JACK connection graph change.
21:31:13.648 ALSA connection graph change.
21:31:13.803 JACK connection change.
21:31:13.806 ALSA connection change.
21:31:22.495 JACK connection graph change.
21:31:22.546 ALSA connection graph change.
21:31:22.626 JACK connection change.
21:31:22.628 ALSA connection change.
21:31:22.678 ALSA connection graph change.
21:31:23.007 JACK connection graph change.
21:31:23.107 JACK connection change.
21:31:23.110 JACK connection graph change.
21:31:23.111 ALSA connection graph change.
21:31:23.316 JACK connection change.
21:31:23.320 ALSA connection change.
21:31:24.586 JACK connection graph change.
21:31:24.735 JACK connection graph change.
21:31:24.932 JACK connection graph change.
21:31:25.208 JACK connection graph change.
21:31:25.484 JACK connection graph change.
21:31:25.486 ALSA connection graph change.
21:32:13.555 Transport start.
[0mfirewire ERR: wait status < 0! (= -1)
JackAudioDriver::ProcessAsync: read error, skip cycle
21:32:57.821 Transport stop.

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE (mockbuild@planetforge.stanford.edu) (gcc version 4.4.2 20091222 (Red Hat 4.4.2-20) (GCC) ) #1 SMP PREEMPT RT Thu Jan 21 22:07:32 EST 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x130000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-18000
RAMDISK: 374e2000 - 37fef780
Allocated new RAMDISK: 00b56000 - 01663780
Move RAMDISK from 00000000374e2000 - 0000000037fef77f to 00b56000 - 0166377f
ACPI: RSDP 000faca0 00014 (v00 ACPIAM)
ACPI: RSDT cffc0000 00040 (v01 090909 RSDT1450 20090909 MSFT 00000097)
ACPI: FACP cffc0200 00084 (v01 090909 FACP1450 20090909 MSFT 00000097)
ACPI: DSDT cffc04a0 0495E (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
ACPI: FACS cffce000 00040
ACPI: APIC cffc0390 00080 (v01 090909 APIC1450 20090909 MSFT 00000097)
ACPI: MCFG cffc0410 0003C (v01 090909 OEMMCFG 20090909 MSFT 00000097)
ACPI: WDRT cffc0450 00047 (v01 090909 NV-WDRT 20090909 MSFT 00000097)
ACPI: OEMB cffce040 00072 (v01 090909 OEMB1450 20090909 MSFT 00000097)
ACPI: HPET cffc4e00 00038 (v01 090909 OEMHPET0 20090909 MSFT 00000097)
ACPI: SSDT cffc4e40 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
3978MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000b4cfb0] TEXT DATA BSS ==> [0000400000 - 0000b4cfb0]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0000b4d000 - 0000b550db] BRK ==> [0000b4d000 - 0000b550db]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000b56000 - 0001663780] NEW RAMDISK ==> [0000b56000 - 0001663780]
#8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cffc0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048399
free_area_init_node: node 0, pgdat c09c8e00, node_mem_map c1664200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 7957 pages used for memmap
HighMem zone: 813741 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages at c3c92000, static data 34180 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038670
Kernel command line: ro root=UUID=92ef6280-9b9a-48a3-8c88-403d3796e1a8 nomodeset LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet vga=792 selinux=0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 59768064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000375fe:00130000)
Memory: 4075396k/4980736k available (3740k kernel code, 117344k reserved, 2307k data, 528k init, 3286792k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc09e9000 - 0xc0a6d000 ( 528 kB)
.data : 0xc07a73f9 - 0xc09e8110 (2307 kB)
.text : 0xc0400000 - 0xc07a73f9 (3740 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Preemptible RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 3113.886 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6227.77 BogoMIPS (lpj=3113886)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Counters: AMD PMU driver.
... version: 0
... bit width: 48
... generic counters: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose counters: 0
... counter mask: 000000000000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22437 entries in 44 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II X2 255 Processor stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6228.18 BogoMIPS (lpj=3114091)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) II X2 255 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 55520785765 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (12455.95 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=480 bytes
sizeof(dentry)=156 bytes
sizeof(ext3inode)=644 bytes
sizeof(buffer_head)=112 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3284 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 0:56:46 Date: 12/02/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - E2, should be DD 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x4f00-0x4fff]
pci 0000:00:01.1: reg 10 io port: [0x4900-0x493f]
pci 0000:00:01.1: reg 20 io port: [0x4d00-0x4d3f]
pci 0000:00:01.1: reg 24 io port: [0x4e00-0x4e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfbd7f000-0xfbd7ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfbd7ec00-0xfbd7ecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xfbd78000-0xfbd7bfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xfbd7d000-0xfbd7dfff]
pci 0000:00:07.0: reg 14 io port: [0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xe400-0xe407]
pci 0000:00:08.0: reg 14 io port: [0xe080-0xe083]
pci 0000:00:08.0: reg 18 io port: [0xe000-0xe007]
pci 0000:00:08.0: reg 1c io port: [0xdc00-0xdc03]
pci 0000:00:08.0: reg 20 io port: [0xd880-0xd88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfbd7c000-0xfbd7cfff]
pci 0000:00:08.1: reg 10 io port: [0xd800-0xd807]
pci 0000:00:08.1: reg 14 io port: [0xd480-0xd483]
pci 0000:00:08.1: reg 18 io port: [0xd400-0xd407]
pci 0000:00:08.1: reg 1c io port: [0xd080-0xd083]
pci 0000:00:08.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xfbd77000-0xfbd77fff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:01:06.0: reg 10 32bit mmio: [0xfbeff800-0xfbefffff]
pci 0000:01:06.0: reg 14 32bit mmio: [0xfbef8000-0xfbefbfff]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:06.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:00:04.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: bridge 32bit mmio: [0xfbf00000-0xfdffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:0c.0: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x80f has been reserved
system 00:07: ioport range 0x4000-0x407f has been reserved
system 00:07: ioport range 0x4080-0x40ff has been reserved
system 00:07: ioport range 0x4400-0x447f has been reserved
system 00:07: ioport range 0x4480-0x44ff has been reserved
system 00:07: ioport range 0x4800-0x487f has been reserved
system 00:07: ioport range 0x4880-0x48ff has been reserved
system 00:07: ioport range 0x4c00-0x4c7f has been reserved
system 00:07: ioport range 0x4c80-0x4cff has been reserved
system 00:07: iomem range 0xfec80000-0x1fd93ffff could not be reserved
system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: ioport range 0xa00-0xadf has been reserved
system 00:0a: ioport range 0xae0-0xaef has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: 0xfbf00000-0xfdffffff
pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: 0xfe000000-0xfe0fffff
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfdffffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe0fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11317k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1291251406.425:1): initialized
Warning: could not register the kmem tracer
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1564
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf7e80000, using 6144k, total 65536k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:c6e0
vesafb: pmi: set display start = c00cc716, set palette = c00cc780
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: VESA VGA (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (30 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Clocksource tsc unstable (delta = 17830121265 ns)
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbd7ec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbd7f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:74:910
rtc_cmos 00:02: setting system clock to 2010-12-02 00:56:47 UTC (1291251407)
Initalizing network drop monitor service
*****************************************************************************
* *
* REMINDER, the following debugging option is turned on in your .config: *
* *
* *
* it may increase runtime overhead and latencies. *
* *
*****************************************************************************
Freeing unused kernel memory: 528k freed
Write protecting the kernel text: 3744k
Write protecting the kernel read-only data: 1720k
dracut: dracut-005-5.fc12
udev: starting version 145
dracut: Starting plymouth daemon
usb 1-4: new high speed USB device using ehci_hcd and address 2
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 21
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 21
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 20
ata6: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 20
usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
ata1.00: ATAPI: TSSTcorp CDDVDW TS-H662A, UO00, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H662A UO00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata2: port disabled. ignoring.
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/100
ata3.00: 488397168 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
usb 2-5: new full speed USB device using ohci_hcd and address 2
sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-5: New USB device found, idVendor=058f, idProduct=9360
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: USB Reader
usb 2-5: Manufacturer:
usb 2-5: SerialNumber: 2004888
usb 2-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 1-4.1: new low speed USB device using ehci_hcd and address 4
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-4.1: New USB device found, idVendor=0b39, idProduct=0d04
usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.1: Product: USB KVM Switch 4 PORT V2.7
usb 1-4.1: Manufacturer: USB KVM Switch 4 PORT V2.7
usb 1-4.1: configuration #1 chosen from 1 choice
input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input3
generic-usb 0003:0B39:0D04.0001: input,hidraw0: USB HID v1.10 Keyboard [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:02.1-4.1/input0
input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.1/input/input4
generic-usb 0003:0B39:0D04.0002: input,hidraw1: USB HID v1.10 Mouse [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:02.1-4.1/input1
usb 1-4.2: new low speed USB device using ehci_hcd and address 5
usb 1-4.2: New USB device found, idVendor=13ee, idProduct=0003
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: Optical Mouse
usb 1-4.2: Manufacturer: MosArt
usb 1-4.2: configuration #1 chosen from 1 choice
input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input5
generic-usb 0003:13EE:0003.0003: input,hidraw2: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:02.1-4.2/input0
usb 1-4.3: new low speed USB device using ehci_hcd and address 6
usb 1-4.3: device descriptor read/64, error -32
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-4.3: device descriptor read/64, error -32
usb 1-4.3: new low speed USB device using ehci_hcd and address 7
usb 1-4.3: device descriptor read/64, error -32
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
dracut: Mounted root filesystem /dev/sda1
usb 1-4.3: device descriptor read/64, error -32
usb 1-4.3: new low speed USB device using ehci_hcd and address 8
dracut: Switching root
usb 1-4.3: device not accepting address 8, error -32
usb 1-4.3: new low speed USB device using ehci_hcd and address 9
usb 1-4.3: device not accepting address 9, error -32
hub 1-4:1.0: unable to enumerate USB device on port 3
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
udev: starting version 145
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
ohci1394 0000:01:06.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbeff800-fbefffff] Max Packet=[2048] IR/IT contexts=[4/8]
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 44:87:fc:5d:95:f3
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:05.0: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x20/0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x1f, aux=0x0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4e00
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.12 Fri Oct 8 13:22:24 PDT 2010
device-mapper: multipath: version 1.1.0 loaded
ieee1394: Host added: ID:BUS[0-00:1023] GUID[660050c50000c34f]
ieee1394: Node added: ID:BUS[0-01:1023] GUID[001486af1e04a3a8]
ieee1394: Node added: ID:BUS[0-02:1023] GUID[001486af1db8a395]
EXT3 FS on sda1, internal journal
Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k

Nov 28 17:37:04 client2 kernel: imklog 4.4.2, log source = /proc/kmsg started.
Nov 28 17:37:04 client2 rsyslogd: [origin software="rsyslogd" swVersion="4.4.2" x-pid="882" x-info="http://www.rsyslog.com"] (re)start
Nov 28 19:22:04 client2 kernel: ardour-2.8.11[2679]: segfault at a0830cc ip 438178b8 sp bffca1e0 error 4 in liblrdf.so.2.0.0[43816000+7000]
Nov 28 19:22:05 client2 abrt[2706]: saved core dump of pid 2679 (/usr/lib/ardour2/ardour-2.8.11) to /var/spool/abrt/ccpp-1290990125-2679.new/coredump (78934016 bytes)
Nov 28 19:22:05 client2 abrtd: Directory 'ccpp-1290990125-2679' creation detected
Nov 28 19:22:07 client2 abrtd: New crash /var/spool/abrt/ccpp-1290990125-2679, processing
Nov 28 19:22:07 client2 abrtd: Registered Action plugin 'RunApp'
Nov 28 19:22:07 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290990125-2679','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:22:21 client2 abrtd: Getting crash infos...
Nov 28 19:22:59 client2 abrt[2739]: saved core dump of pid 2728 (/usr/lib/firefox-3.5/firefox) to /var/spool/abrt/ccpp-1290990179-2728.new/coredump (97386496 bytes)
Nov 28 19:22:59 client2 abrtd: Directory 'ccpp-1290990179-2728' creation detected
Nov 28 19:22:59 client2 abrtd: New crash /var/spool/abrt/ccpp-1290990179-2728, processing
Nov 28 19:22:59 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290990179-2728','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:24:14 client2 abrtd: Getting crash infos...
Nov 28 19:24:42 client2 abrt[2779]: saved core dump of pid 2761 (/usr/lib/firefox-3.5/firefox) to /var/spool/abrt/ccpp-1290990280-2761.new/coredump (111218688 bytes)
Nov 28 19:24:42 client2 abrtd: Directory 'ccpp-1290990280-2761' creation detected
Nov 28 19:24:42 client2 abrtd: New crash /var/spool/abrt/ccpp-1290990280-2761, processing
Nov 28 19:24:42 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290990280-2761','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:24:51 client2 abrtd: Getting crash infos...
Nov 28 19:24:56 client2 kernel: python[2789]: segfault at 4c2fb875 ip 4c67e462 sp bfbeefc0 error 4 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:24:57 client2 abrt[2790]: saved core dump of pid 2789 (/usr/bin/python) to /var/spool/abrt/ccpp-1290990296-2789.new/coredump (9768960 bytes)
Nov 28 19:24:57 client2 abrtd: Directory 'ccpp-1290990296-2789' creation detected
Nov 28 19:24:58 client2 abrtd: New crash /var/spool/abrt/ccpp-1290990296-2789, processing
Nov 28 19:24:58 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290990296-2789','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:25:27 client2 kernel: qjackctl[2795]: segfault at a000000 ip 45ea7765 sp bfb1bf34 error 4 in libc-2.11.2.so[45e34000+172000]
Nov 28 19:25:27 client2 abrt[2796]: saved core dump of pid 2795 (/usr/bin/qjackctl) to /var/spool/abrt/ccpp-1290990327-2795.new/coredump (2576384 bytes)
Nov 28 19:25:27 client2 abrtd: Directory 'ccpp-1290990327-2795' creation detected
Nov 28 19:25:27 client2 abrtd: New crash /var/spool/abrt/ccpp-1290990327-2795, processing
Nov 28 19:25:27 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290990327-2795','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:26:02 client2 kernel: ffado-mixer[2805]: segfault at b72e04f0 ip 4c67e45f sp bfd13af0 error 4 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:26:02 client2 abrt[2806]: saved core dump of pid 2805 (/usr/bin/python) to /var/spool/abrt/ccpp-1290990362-2805.new/coredump (1589248 bytes)
Nov 28 19:26:02 client2 abrtd: Directory 'ccpp-1290990362-2805' creation detected
Nov 28 19:26:02 client2 abrtd: Interpreter crashed, but no packaged script detected: '/usr/bin/python /usr/bin/ffado-mixer'
Nov 28 19:26:02 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290990362-2805 (res:4), deleting
Nov 28 19:26:05 client2 kernel: jackd[2498]: segfault at 0 ip 4496fdb6 sp b76170f0 error 4 in libffado.so.2.0.0[448bb000+179000]
Nov 28 19:26:05 client2 abrt[2807]: saved core dump of pid 2486 (/usr/bin/jackd) to /var/spool/abrt/ccpp-1290990365-2486.new/coredump (68259840 bytes)
Nov 28 19:26:05 client2 abrtd: Directory 'ccpp-1290990365-2486' creation detected
Nov 28 19:26:05 client2 abrtd: Package 'jack-audio-connection-kit' isn't signed with proper key
Nov 28 19:26:05 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290990365-2486 (res:5), deleting
Nov 28 19:26:16 client2 kernel: ffado-mixer[2823]: segfault at b73fb0b0 ip 4c5f3b76 sp bfd6c4e0 error 7 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:26:16 client2 abrt[2827]: saved core dump of pid 2823 (/usr/bin/python) to /var/spool/abrt/ccpp-1290990376-2823.new/coredump (15065088 bytes)
Nov 28 19:26:16 client2 abrtd: Directory 'ccpp-1290990376-2823' creation detected
Nov 28 19:26:16 client2 abrtd: Interpreter crashed, but no packaged script detected: '/usr/bin/python /usr/bin/ffado-mixer'
Nov 28 19:26:16 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290990376-2823 (res:4), deleting
Nov 28 19:26:18 client2 kernel: ffado-mixer[2828]: segfault at 8a000054 ip 4c67e462 sp bff85e30 error 4 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:26:18 client2 abrt[2829]: not dumping repeating crash in '/usr/bin/python'
Nov 28 19:26:35 client2 kernel: jackd[2824]: segfault at 0 ip 4496fdb6 sp b77f50f0 error 4 in libffado.so.2.0.0[448bb000+179000]
Nov 28 19:26:36 client2 abrt[2830]: saved core dump of pid 2811 (/usr/bin/jackd) to /var/spool/abrt/ccpp-1290990395-2811.new/coredump (68403200 bytes)
Nov 28 19:26:36 client2 abrtd: Directory 'ccpp-1290990395-2811' creation detected
Nov 28 19:26:36 client2 abrtd: Package 'jack-audio-connection-kit' isn't signed with proper key
Nov 28 19:26:36 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290990395-2811 (res:5), deleting
Nov 28 19:26:48 client2 kernel: ffado-mixer[2836]: segfault at 4c2fb875 ip 4c67e462 sp bf975090 error 4 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:26:48 client2 abrt[2837]: saved core dump of pid 2836 (/usr/bin/python) to /var/spool/abrt/ccpp-1290990408-2836.new/coredump (6275072 bytes)
Nov 28 19:26:48 client2 abrtd: Directory 'ccpp-1290990408-2836' creation detected
Nov 28 19:26:48 client2 abrtd: Executable '/usr/bin/python' doesn't belong to any package
Nov 28 19:26:48 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290990408-2836 (res:4), deleting
Nov 28 19:28:04 client2 kernel: ffado-mixer[2838]: segfault at b724d044 ip 4c67e45f sp bfc846e0 error 4 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:28:04 client2 abrt[2839]: saved core dump of pid 2838 (/usr/bin/python) to /var/spool/abrt/ccpp-1290990484-2838.new/coredump (2310144 bytes)
Nov 28 19:28:04 client2 abrtd: Directory 'ccpp-1290990484-2838' creation detected
Nov 28 19:28:04 client2 abrtd: Interpreter crashed, but no packaged script detected: '/usr/bin/python /usr/bin/ffado-mixer'
Nov 28 19:28:04 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290990484-2838 (res:4), deleting
Nov 28 19:48:58 client2 kernel: ffado-mixer[2846]: segfault at 4c2f7d80 ip 4c611e0f sp bfa191e0 error 4 in libpython2.6.so.1.0[4c58e000+15b000]
Nov 28 19:48:58 client2 abrt[2847]: saved core dump of pid 2846 (/usr/bin/python) to /var/spool/abrt/ccpp-1290991738-2846.new/coredump (974848 bytes)
Nov 28 19:48:58 client2 abrtd: Directory 'ccpp-1290991738-2846' creation detected
Nov 28 19:48:58 client2 abrtd: Interpreter crashed, but no packaged script detected: '/usr/bin/python /usr/bin/ffado-mixer'
Nov 28 19:48:58 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290991738-2846 (res:4), deleting
Nov 28 19:49:09 client2 kernel: konsole[2848]: segfault at 54258e70 ip 43d62b6c sp bfd01c9c error 6 in libkdeui.so.5.4.0[439be000+3bf000]
Nov 28 19:49:09 client2 abrt[2849]: saved core dump of pid 2848 (/usr/bin/konsole) to /var/spool/abrt/ccpp-1290991749-2848.new/coredump (1802240 bytes)
Nov 28 19:49:09 client2 abrtd: Directory 'ccpp-1290991749-2848' creation detected
Nov 28 19:49:09 client2 abrtd: New crash /var/spool/abrt/ccpp-1290991749-2848, processing
Nov 28 19:49:09 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290991749-2848','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:50:40 client2 NetworkManager[1200]: [1290991840.208728] [nm-manager.c:1331] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of name 'org.freedesktop.NetworkManagerUserSettings': no such name
Nov 28 19:50:42 client2 acpid: client 1483[0:0] has disconnected
Nov 28 19:50:42 client2 acpid: client connected from 2965[0:0]
Nov 28 19:50:42 client2 acpid: 1 client rule loaded
Nov 28 19:50:49 client2 NetworkManager[1200]: [1290991849.631338] [nm-manager.c:1331] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of name 'org.freedesktop.NetworkManagerUserSettings': no such name
Nov 28 19:50:57 client2 kernel: plasma-desktop[3200]: segfault at cb6d6e40 ip ac12148c sp bff79ba0 error 7 in plasma_engine_applicationjobs.so[ac11d000+b000]
Nov 28 19:50:59 client2 abrt[3201]: saved core dump of pid 3200 (/usr/bin/plasma-desktop) to /var/spool/abrt/ccpp-1290991857-3200.new/coredump (39124992 bytes)
Nov 28 19:50:59 client2 abrtd: Directory 'ccpp-1290991857-3200' creation detected
Nov 28 19:50:59 client2 abrtd: Executable '/usr/bin/plasma-desktop' doesn't belong to any package
Nov 28 19:50:59 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290991857-3200 (res:4), deleting
Nov 28 19:51:08 client2 pulseaudio[3221]: pid.c: Daemon already running.
Nov 28 19:51:08 client2 pulseaudio[3233]: pid.c: Daemon already running.
Nov 28 19:51:09 client2 pulseaudio[1750]: module.c: Module "module-device-manager" should be loaded once at most. Refusing to load.
Nov 28 19:51:09 client2 gnome-keyring-daemon[2992]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Nov 28 19:51:12 client2 setroubleshoot: SELinux not enabled, setroubleshootd exiting...
Nov 28 19:51:15 client2 kernel: nepomukservices[3535]: segfault at 46a9591c ip 46d3ec21 sp bffae660 error 6 in libQtCore.so.4.6.3[46c2d000+262000]
Nov 28 19:51:15 client2 abrt[3542]: saved core dump of pid 3535 (/usr/bin/nepomukservicestub) to /var/spool/abrt/ccpp-1290991875-3535.new/coredump (3997696 bytes)
Nov 28 19:51:15 client2 abrtd: Directory 'ccpp-1290991875-3535' creation detected
Nov 28 19:51:15 client2 abrtd: New crash /var/spool/abrt/ccpp-1290991875-3535, processing
Nov 28 19:51:15 client2 abrtd: RunApp('/var/spool/abrt/ccpp-1290991875-3535','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
Nov 28 19:51:30 client2 kdm[1475]: X server for display :0 terminated unexpectedly
Nov 28 19:51:30 client2 NetworkManager[1200]: [1290991890.993895] [nm-manager.c:1331] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of name 'org.freedesktop.NetworkManagerUserSettings': no such name
Nov 28 19:51:31 client2 acpid: client 2965[0:0] has disconnected
Nov 28 19:51:31 client2 acpid: client connected from 3564[0:0]
Nov 28 19:51:31 client2 acpid: 1 client rule loaded
Nov 28 19:51:43 client2 kdm: :0[3567]: Fatal X server IO error: Interrupted system call
Nov 28 19:51:44 client2 init: tty4 main process (1476) killed by TERM signal
Nov 28 19:51:44 client2 init: tty5 main process (1477) killed by TERM signal
Nov 28 19:51:44 client2 init: tty2 main process (1478) killed by TERM signal
Nov 28 19:51:44 client2 init: tty3 main process (1479) killed by TERM signal
Nov 28 19:51:44 client2 init: tty6 main process (1480) killed by TERM signal
Nov 28 19:51:45 client2 abrtd: UnRegistered Reporter plugin Bugzilla
Nov 28 19:51:45 client2 abrtd: UnRegistered Analyzer plugin CCpp
Nov 28 19:51:45 client2 abrtd: UnRegistered Analyzer plugin Kerneloops
Nov 28 19:51:45 client2 abrtd: UnRegistered Reporter plugin KerneloopsReporter
Nov 28 19:51:45 client2 abrtd: UnRegistered Action plugin KerneloopsScanner
Nov 28 19:51:45 client2 abrtd: UnRegistered Reporter plugin Logger
Nov 28 19:51:45 client2 abrtd: UnRegistered Analyzer plugin Python
Nov 28 19:51:45 client2 abrtd: UnRegistered Action plugin RunApp
Nov 28 19:51:45 client2 abrtd: UnRegistered Database plugin SQLite3
Nov 28 19:51:45 client2 abrtd: Got signal 15, exiting
Nov 28 19:51:50 client2 acpid: exiting
Nov 28 19:51:50 client2 ntpd[1226]: ntpd exiting on signal 15
Nov 28 19:51:50 client2 pcscd: pcscdaemon.c:581:signal_trap() Preparing for suicide
Nov 28 19:51:51 client2 pcscd: readerfactory.c:1242:RFCleanupReaders() entering cleaning function
Nov 28 19:51:51 client2 pcscd: pcscdaemon.c:531:at_exit() cleaning /var/run
Nov 28 19:51:52 client2 NetworkManager[1200]: caught signal 15, shutting down normally.
Nov 28 19:51:52 client2 NetworkManager[1200]: exiting (success)
Nov 28 19:51:53 client2 rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Nov 28 19:51:54 client2 auditd[849]: Error sending signal_info request (Operation not supported)
Nov 28 19:51:54 client2 auditd[849]: The audit daemon is exiting.
Nov 28 19:51:54 client2 kernel: type=1305 audit(1290991914.677:53): audit_pid=0 old=849 auid=4294967295 ses=4294967295 res=1
Nov 28 19:51:54 client2 cpuspeed: Disabling ondemand cpu frequency scaling governor
Nov 28 19:51:55 client2 kernel: Kernel logging (proc) stopped.
Nov 28 19:52:40 client2 kernel: imklog 4.4.2, log source = /proc/kmsg started.
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys cpuset
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys cpu
Nov 28 19:52:40 client2 kernel: Linux version 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE (mockbuild@planetforge.stanford.edu) (gcc version 4.4.2 20091222 (Red Hat 4.4.2-20) (GCC) ) #1 SMP PREEMPT RT Thu Jan 21 22:07:32 EST 2010
Nov 28 19:52:40 client2 kernel: KERNEL supported cpus:
Nov 28 19:52:40 client2 kernel: Intel GenuineIntel
Nov 28 19:52:40 client2 kernel: AMD AuthenticAMD
Nov 28 19:52:40 client2 kernel: NSC Geode by NSC
Nov 28 19:52:40 client2 kernel: Cyrix CyrixInstead
Nov 28 19:52:40 client2 kernel: Centaur CentaurHauls
Nov 28 19:52:40 client2 kernel: Transmeta GenuineTMx86
Nov 28 19:52:40 client2 kernel: Transmeta TransmetaCPU
Nov 28 19:52:40 client2 kernel: UMC UMC UMC UMC
Nov 28 19:52:40 client2 kernel: BIOS-provided physical RAM map:
Nov 28 19:52:40 client2 kernel: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov 28 19:52:40 client2 kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Nov 28 19:52:40 client2 kernel: DMI present.
Nov 28 19:52:40 client2 kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Nov 28 19:52:40 client2 kernel: last_pfn = 0x130000 max_arch_pfn = 0x1000000
Nov 28 19:52:40 client2 kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 28 19:52:40 client2 kernel: init_memory_mapping: 0000000000000000-00000000375fe000
Nov 28 19:52:40 client2 kernel: NX (Execute Disable) protection: active
Nov 28 19:52:40 client2 kernel: RAMDISK: 374e2000 - 37fef780
Nov 28 19:52:40 client2 kernel: Allocated new RAMDISK: 00b56000 - 01663780
Nov 28 19:52:40 client2 kernel: Move RAMDISK from 00000000374e2000 - 0000000037fef77f to 00b56000 - 0166377f
Nov 28 19:52:40 client2 kernel: ACPI: RSDP 000faca0 00014 (v00 ACPIAM)
Nov 28 19:52:40 client2 kernel: ACPI: RSDT cffc0000 00040 (v01 090909 RSDT1450 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: FACP cffc0200 00084 (v01 090909 FACP1450 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: DSDT cffc04a0 0495E (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
Nov 28 19:52:40 client2 kernel: ACPI: FACS cffce000 00040
Nov 28 19:52:40 client2 kernel: ACPI: APIC cffc0390 00080 (v01 090909 APIC1450 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: MCFG cffc0410 0003C (v01 090909 OEMMCFG 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: WDRT cffc0450 00047 (v01 090909 NV-WDRT 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: OEMB cffce040 00072 (v01 090909 OEMB1450 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: HPET cffc4e00 00038 (v01 090909 OEMHPET0 20090909 MSFT 00000097)
Nov 28 19:52:40 client2 kernel: ACPI: SSDT cffc4e40 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
Nov 28 19:52:40 client2 kernel: 3978MB HIGHMEM available.
Nov 28 19:52:40 client2 kernel: 885MB LOWMEM available.
Nov 28 19:52:40 client2 kernel: mapped low ram: 0 - 375fe000
Nov 28 19:52:40 client2 kernel: low ram: 0 - 375fe000
Nov 28 19:52:40 client2 kernel: node 0 low ram: 00000000 - 375fe000
Nov 28 19:52:40 client2 kernel: node 0 bootmap 00014000 - 0001aec0
Nov 28 19:52:40 client2 kernel: (9 early reservations) ==> bootmem [0000000000 - 00375fe000]
Nov 28 19:52:40 client2 kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Nov 28 19:52:40 client2 kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Nov 28 19:52:40 client2 kernel: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Nov 28 19:52:40 client2 kernel: #3 [0000400000 - 0000b4cfb0] TEXT DATA BSS ==> [0000400000 - 0000b4cfb0]
Nov 28 19:52:40 client2 kernel: #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
Nov 28 19:52:40 client2 kernel: #5 [0000b4d000 - 0000b550db] BRK ==> [0000b4d000 - 0000b550db]
Nov 28 19:52:40 client2 kernel: #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
Nov 28 19:52:40 client2 kernel: #7 [0000b56000 - 0001663780] NEW RAMDISK ==> [0000b56000 - 0001663780]
Nov 28 19:52:40 client2 kernel: #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
Nov 28 19:52:40 client2 kernel: found SMP MP-table at [c00ff780] ff780
Nov 28 19:52:40 client2 kernel: Zone PFN ranges:
Nov 28 19:52:40 client2 kernel: DMA 0x00000010 -> 0x00001000
Nov 28 19:52:40 client2 kernel: Normal 0x00001000 -> 0x000375fe
Nov 28 19:52:40 client2 kernel: HighMem 0x000375fe -> 0x00130000
Nov 28 19:52:40 client2 kernel: Movable zone start PFN for each node
Nov 28 19:52:40 client2 kernel: early_node_map[3] active PFN ranges
Nov 28 19:52:40 client2 kernel: 0: 0x00000010 -> 0x0000009f
Nov 28 19:52:40 client2 kernel: 0: 0x00000100 -> 0x000cffc0
Nov 28 19:52:40 client2 kernel: 0: 0x00100000 -> 0x00130000
Nov 28 19:52:40 client2 kernel: Using APIC driver default
Nov 28 19:52:40 client2 kernel: ACPI: PM-Timer IO Port: 0x4008
Nov 28 19:52:40 client2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 28 19:52:40 client2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 28 19:52:40 client2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 28 19:52:40 client2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 28 19:52:40 client2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 28 19:52:40 client2 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Nov 28 19:52:40 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 28 19:52:40 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 28 19:52:40 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Nov 28 19:52:40 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Nov 28 19:52:40 client2 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 28 19:52:40 client2 kernel: Using ACPI (MADT) for SMP configuration information
Nov 28 19:52:40 client2 kernel: ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Nov 28 19:52:40 client2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov 28 19:52:40 client2 kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Nov 28 19:52:40 client2 kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Nov 28 19:52:40 client2 kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Nov 28 19:52:40 client2 kernel: Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Nov 28 19:52:40 client2 kernel: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
Nov 28 19:52:40 client2 kernel: PERCPU: Embedded 14 pages at c3c92000, static data 34180 bytes
Nov 28 19:52:40 client2 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038670
Nov 28 19:52:40 client2 kernel: Kernel command line: ro root=UUID=92ef6280-9b9a-48a3-8c88-403d3796e1a8 nomodeset LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet vga=792 selinux=0
Nov 28 19:52:40 client2 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 28 19:52:40 client2 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 28 19:52:40 client2 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 28 19:52:40 client2 kernel: Enabling fast FPU save and restore... done.
Nov 28 19:52:40 client2 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 28 19:52:40 client2 kernel: Initializing CPU#0
Nov 28 19:52:40 client2 kernel: allocated 59768064 bytes of page_cgroup
Nov 28 19:52:40 client2 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 28 19:52:40 client2 kernel: Initializing HighMem for node 0 (000375fe:00130000)
Nov 28 19:52:40 client2 kernel: Memory: 4075396k/4980736k available (3740k kernel code, 117344k reserved, 2307k data, 528k init, 3286792k highmem)
Nov 28 19:52:40 client2 kernel: virtual kernel memory layout:
Nov 28 19:52:40 client2 kernel: fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
Nov 28 19:52:40 client2 kernel: pkmap : 0xff600000 - 0xff800000 (2048 kB)
Nov 28 19:52:40 client2 kernel: vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
Nov 28 19:52:40 client2 kernel: lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
Nov 28 19:52:40 client2 kernel: .init : 0xc09e9000 - 0xc0a6d000 ( 528 kB)
Nov 28 19:52:40 client2 kernel: .data : 0xc07a73f9 - 0xc09e8110 (2307 kB)
Nov 28 19:52:40 client2 kernel: .text : 0xc0400000 - 0xc07a73f9 (3740 kB)
Nov 28 19:52:40 client2 kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 28 19:52:40 client2 kernel: Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Nov 28 19:52:40 client2 kernel: Preemptible RCU implementation.
Nov 28 19:52:40 client2 kernel: NR_IRQS:1280
Nov 28 19:52:40 client2 kernel: Fast TSC calibration using PIT
Nov 28 19:52:40 client2 kernel: Detected 3114.367 MHz processor.
Nov 28 19:52:40 client2 kernel: Console: colour dummy device 80x25
Nov 28 19:52:40 client2 kernel: console [tty0] enabled
Nov 28 19:52:40 client2 kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Nov 28 19:52:40 client2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6228.73 BogoMIPS (lpj=3114367)
Nov 28 19:52:40 client2 kernel: Security Framework initialized
Nov 28 19:52:40 client2 kernel: SELinux: Disabled at boot.
Nov 28 19:52:40 client2 kernel: Mount-cache hash table entries: 512
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys ns
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys cpuacct
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys memory
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys devices
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys freezer
Nov 28 19:52:40 client2 kernel: Initializing cgroup subsys net_cls
Nov 28 19:52:40 client2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 28 19:52:40 client2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Nov 28 19:52:40 client2 kernel: CPU: Physical Processor ID: 0
Nov 28 19:52:40 client2 kernel: CPU: Processor Core ID: 0
Nov 28 19:52:40 client2 kernel: mce: CPU supports 6 MCE banks
Nov 28 19:52:40 client2 kernel: using C1E aware idle routine
Nov 28 19:52:40 client2 kernel: Performance Counters: AMD PMU driver.
Nov 28 19:52:40 client2 kernel: ... version: 0
Nov 28 19:52:40 client2 kernel: ... bit width: 48
Nov 28 19:52:40 client2 kernel: ... generic counters: 4
Nov 28 19:52:40 client2 kernel: ... value mask: 0000ffffffffffff
Nov 28 19:52:40 client2 kernel: ... max period: 00007fffffffffff
Nov 28 19:52:40 client2 kernel: ... fixed-purpose counters: 0
Nov 28 19:52:40 client2 kernel: ... counter mask: 000000000000000f
Nov 28 19:52:40 client2 kernel: Checking 'hlt' instruction... OK.
Nov 28 19:52:40 client2 kernel: ACPI: Core revision 20090521
Nov 28 19:52:40 client2 kernel: ftrace: converting mcount calls to 0f 1f 44 00 00
Nov 28 19:52:40 client2 kernel: ftrace: allocating 22437 entries in 44 pages
Nov 28 19:52:40 client2 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 28 19:52:40 client2 kernel: CPU0: AMD Athlon(tm) II X2 255 Processor stepping 02
Nov 28 19:52:40 client2 kernel: Booting processor 1 APIC 0x1 ip 0x6000
Nov 28 19:52:40 client2 kernel: Initializing CPU#1
Nov 28 19:52:40 client2 kernel: Calibrating delay using timer specific routine.. 6228.17 BogoMIPS (lpj=3114089)
Nov 28 19:52:40 client2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 28 19:52:40 client2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Nov 28 19:52:40 client2 kernel: CPU: Physical Processor ID: 0
Nov 28 19:52:40 client2 kernel: CPU: Processor Core ID: 1
Nov 28 19:52:40 client2 kernel: mce: CPU supports 6 MCE banks
Nov 28 19:52:40 client2 kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Nov 28 19:52:40 client2 kernel: CPU1: AMD Athlon(tm) II X2 255 Processor stepping 02
Nov 28 19:52:40 client2 kernel: checking TSC synchronization [CPU#0 -> CPU#1]:
Nov 28 19:52:40 client2 kernel: Measured 55629457751 cycles TSC warp between CPUs, turning off TSC clock.
Nov 28 19:52:40 client2 kernel: Marking TSC unstable due to check_tsc_sync_source failed
Nov 28 19:52:40 client2 kernel: Brought up 2 CPUs
Nov 28 19:52:40 client2 kernel: Total of 2 processors activated (12456.91 BogoMIPS).
Nov 28 19:52:40 client2 kernel: Booting paravirtualized kernel on bare hardware
Nov 28 19:52:40 client2 kernel: regulator: core version 0.5
Nov 28 19:52:40 client2 kernel: Time: 0:52:24 Date: 11/29/10
Nov 28 19:52:40 client2 kernel: NET: Registered protocol family 16
Nov 28 19:52:40 client2 kernel: ACPI: bus type pci registered
Nov 28 19:52:40 client2 kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Nov 28 19:52:40 client2 kernel: PCI: Not using MMCONFIG.
Nov 28 19:52:40 client2 kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
Nov 28 19:52:40 client2 kernel: PCI: Using configuration type 1 for base access
Nov 28 19:52:40 client2 kernel: PCI: Using configuration type 1 for extended access
Nov 28 19:52:40 client2 kernel: bio: create slab at 0
Nov 28 19:52:40 client2 kernel: ACPI: Interpreter enabled
Nov 28 19:52:40 client2 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 28 19:52:40 client2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 28 19:52:40 client2 kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Nov 28 19:52:40 client2 kernel: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Nov 28 19:52:40 client2 kernel: PCI: Using MMCONFIG for extended config space
Nov 28 19:52:40 client2 kernel: ACPI Warning: Incorrect checksum in table [OEMB] - E2, should be DD 20090521 tbutils-246
Nov 28 19:52:40 client2 kernel: ACPI: No dock devices found.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 28 19:52:40 client2 kernel: pci 0000:00:01.1: PME# supported from D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:01.1: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:02.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:02.1: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:05.0: PME# supported from D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:05.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:07.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:09.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:0b.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 19:52:40 client2 kernel: pci 0000:00:0c.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
Nov 28 19:52:40 client2 kernel: pci 0000:01:06.0: PME# disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:04.0: transparent bridge
Nov 28 19:52:40 client2 kernel: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Nov 28 19:52:40 client2 kernel: SCSI subsystem initialized
Nov 28 19:52:40 client2 kernel: usbcore: registered new interface driver usbfs
Nov 28 19:52:40 client2 kernel: usbcore: registered new interface driver hub
Nov 28 19:52:40 client2 kernel: usbcore: registered new device driver usb
Nov 28 19:52:40 client2 kernel: PCI: Using ACPI for IRQ routing
Nov 28 19:52:40 client2 kernel: NetLabel: Initializing
Nov 28 19:52:40 client2 kernel: NetLabel: domain hash size = 128
Nov 28 19:52:40 client2 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 28 19:52:40 client2 kernel: NetLabel: unlabeled traffic allowed by default
Nov 28 19:52:40 client2 kernel: hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
Nov 28 19:52:40 client2 kernel: hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Nov 28 19:52:40 client2 kernel: pnp: PnP ACPI init
Nov 28 19:52:40 client2 kernel: ACPI: bus type pnp registered
Nov 28 19:52:40 client2 kernel: pnp: PnP ACPI: found 13 devices
Nov 28 19:52:40 client2 kernel: ACPI: ACPI bus type pnp unregistered
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x800-0x80f has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4000-0x407f has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4080-0x40ff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4400-0x447f has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4480-0x44ff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4800-0x487f has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4880-0x48ff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4c00-0x4c7f has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: ioport range 0x4c80-0x4cff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: iomem range 0xfec80000-0x1fd93ffff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:0a: ioport range 0xa00-0xadf has been reserved
Nov 28 19:52:40 client2 kernel: system 00:0a: ioport range 0xae0-0xaef has been reserved
Nov 28 19:52:40 client2 kernel: system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
Nov 28 19:52:40 client2 kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
Nov 28 19:52:40 client2 kernel: system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
Nov 28 19:52:40 client2 kernel: pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
Nov 28 19:52:40 client2 kernel: pci 0000:00:04.0: IO window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:04.0: MEM window: 0xfbe00000-0xfbefffff
Nov 28 19:52:40 client2 kernel: pci 0000:00:04.0: PREFETCH window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
Nov 28 19:52:40 client2 kernel: pci 0000:00:09.0: IO window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:09.0: MEM window: 0xfbf00000-0xfdffffff
Nov 28 19:52:40 client2 kernel: pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
Nov 28 19:52:40 client2 kernel: pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
Nov 28 19:52:40 client2 kernel: pci 0000:00:0b.0: IO window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:0b.0: MEM window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:0b.0: PREFETCH window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
Nov 28 19:52:40 client2 kernel: pci 0000:00:0c.0: IO window: disabled
Nov 28 19:52:40 client2 kernel: pci 0000:00:0c.0: MEM window: 0xfe000000-0xfe0fffff
Nov 28 19:52:40 client2 kernel: pci 0000:00:0c.0: PREFETCH window: disabled
Nov 28 19:52:40 client2 kernel: NET: Registered protocol family 2
Nov 28 19:52:40 client2 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 28 19:52:40 client2 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 28 19:52:40 client2 kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
Nov 28 19:52:40 client2 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 28 19:52:40 client2 kernel: TCP reno registered
Nov 28 19:52:40 client2 kernel: NET: Registered protocol family 1
Nov 28 19:52:40 client2 kernel: Trying to unpack rootfs image as initramfs...
Nov 28 19:52:40 client2 kernel: Freeing initrd memory: 11317k freed
Nov 28 19:52:40 client2 kernel: apm: BIOS not found.
Nov 28 19:52:40 client2 kernel: audit: initializing netlink socket (disabled)
Nov 28 19:52:40 client2 kernel: type=2000 audit(1290991943.425:1): initialized
Nov 28 19:52:40 client2 kernel: Warning: could not register the kmem tracer
Nov 28 19:52:40 client2 kernel: highmem bounce pool size: 64 pages
Nov 28 19:52:40 client2 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 28 19:52:40 client2 kernel: VFS: Disk quotas dquot_6.5.2
Nov 28 19:52:40 client2 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 28 19:52:40 client2 kernel: msgmni has been set to 1564
Nov 28 19:52:40 client2 kernel: alg: No test for stdrng (krng)
Nov 28 19:52:40 client2 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 28 19:52:40 client2 kernel: io scheduler noop registered
Nov 28 19:52:40 client2 kernel: io scheduler anticipatory registered
Nov 28 19:52:40 client2 kernel: io scheduler deadline registered
Nov 28 19:52:40 client2 kernel: io scheduler cfq registered (default)
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 19:52:40 client2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 28 19:52:40 client2 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 28 19:52:40 client2 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 28 19:52:40 client2 kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf7e80000, using 6144k, total 65536k
Nov 28 19:52:40 client2 kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=1
Nov 28 19:52:40 client2 kernel: vesafb: protected mode interface info at c000:c6e0
Nov 28 19:52:40 client2 kernel: vesafb: pmi: set display start = c00cc716, set palette = c00cc780
Nov 28 19:52:40 client2 kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Nov 28 19:52:40 client2 kernel: vesafb: scrolling: redraw
Nov 28 19:52:40 client2 kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Nov 28 19:52:40 client2 kernel: fbcon: VESA VGA (fb0) is primary device
Nov 28 19:52:40 client2 kernel: Console: switching to colour frame buffer device 128x48
Nov 28 19:52:40 client2 kernel: fb0: VESA VGA frame buffer device
Nov 28 19:52:40 client2 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Nov 28 19:52:40 client2 kernel: ACPI: Power Button [PWRF]
Nov 28 19:52:40 client2 kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Nov 28 19:52:40 client2 kernel: ACPI: Power Button [PWRB]
Nov 28 19:52:40 client2 kernel: processor LNXCPU:00: registered as cooling_device0
Nov 28 19:52:40 client2 kernel: processor LNXCPU:01: registered as cooling_device1
Nov 28 19:52:40 client2 kernel: thermal LNXTHERM:01: registered as thermal_zone0
Nov 28 19:52:40 client2 kernel: ACPI: Thermal Zone [THRM] (30 C)
Nov 28 19:52:40 client2 kernel: isapnp: Scanning for PnP cards...
Nov 28 19:52:40 client2 kernel: isapnp: No Plug & Play device found
Nov 28 19:52:40 client2 kernel: Non-volatile memory driver v1.3
Nov 28 19:52:40 client2 kernel: Linux agpgart interface v0.103
Nov 28 19:52:40 client2 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 28 19:52:40 client2 kernel: Clocksource tsc unstable (delta = 17862184516 ns)
Nov 28 19:52:40 client2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 28 19:52:40 client2 kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 28 19:52:40 client2 kernel: brd: module loaded
Nov 28 19:52:40 client2 kernel: loop: module loaded
Nov 28 19:52:40 client2 kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input2
Nov 28 19:52:40 client2 kernel: Fixed MDIO Bus: probed
Nov 28 19:52:40 client2 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
Nov 28 19:52:40 client2 kernel: ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
Nov 28 19:52:40 client2 kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
Nov 28 19:52:40 client2 kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
Nov 28 19:52:40 client2 kernel: ehci_hcd 0000:00:02.1: debug port 1
Nov 28 19:52:40 client2 kernel: ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbd7ec00
Nov 28 19:52:40 client2 kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
Nov 28 19:52:40 client2 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Nov 28 19:52:40 client2 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 28 19:52:40 client2 kernel: usb usb1: Product: EHCI Host Controller
Nov 28 19:52:40 client2 kernel: usb usb1: Manufacturer: Linux 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE ehci_hcd
Nov 28 19:52:40 client2 kernel: usb usb1: SerialNumber: 0000:00:02.1
Nov 28 19:52:40 client2 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 28 19:52:40 client2 kernel: hub 1-0:1.0: USB hub found
Nov 28 19:52:40 client2 kernel: hub 1-0:1.0: 10 ports detected
Nov 28 19:52:40 client2 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
Nov 28 19:52:40 client2 kernel: ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
Nov 28 19:52:40 client2 rsyslogd: [origin software="rsyslogd" swVersion="4.4.2" x-pid="874" x-info="http://www.rsyslog.com"] (re)start
Nov 28 19:52:40 client2 kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
Nov 28 19:52:40 client2 kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Nov 28 19:52:40 client2 kernel: ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbd7f000
Nov 28 19:52:40 client2 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Nov 28 19:52:40 client2 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 28 19:52:40 client2 kernel: usb usb2: Product: OHCI Host Controller
Nov 28 19:52:40 client2 kernel: usb usb2: Manufacturer: Linux 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE ohci_hcd
Nov 28 19:52:40 client2 kernel: usb usb2: SerialNumber: 0000:00:02.0
Nov 28 19:52:40 client2 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 28 19:52:40 client2 kernel: hub 2-0:1.0: USB hub found
Nov 28 19:52:40 client2 kernel: hub 2-0:1.0: 10 ports detected
Nov 28 19:52:40 client2 kernel: uhci_hcd: USB Universal Host Controller Interface driver
Nov 28 19:52:40 client2 kernel: PNP: No PS/2 controller found. Probing ports directly.
Nov 28 19:52:40 client2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 28 19:52:40 client2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 28 19:52:40 client2 kernel: mice: PS/2 mouse device common for all mice
Nov 28 19:52:40 client2 kernel: rtc_cmos 00:02: RTC can wake from S4
Nov 28 19:52:40 client2 kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Nov 28 19:52:40 client2 kernel: rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Nov 28 19:52:40 client2 kernel: device-mapper: uevent: version 1.0.3
Nov 28 19:52:40 client2 kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Nov 28 19:52:40 client2 kernel: cpuidle: using governor ladder
Nov 28 19:52:40 client2 kernel: cpuidle: using governor menu
Nov 28 19:52:40 client2 kernel: usbcore: registered new interface driver hiddev
Nov 28 19:52:40 client2 kernel: usbcore: registered new interface driver usbhid
Nov 28 19:52:40 client2 kernel: usbhid: v2.6:USB HID core driver
Nov 28 19:52:40 client2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 28 19:52:40 client2 kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Nov 28 19:52:40 client2 kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Nov 28 19:52:40 client2 kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Nov 28 19:52:40 client2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 28 19:52:40 client2 kernel: TCP cubic registered
Nov 28 19:52:40 client2 kernel: Initializing XFRM netlink socket
Nov 28 19:52:40 client2 kernel: NET: Registered protocol family 17
Nov 28 19:52:40 client2 kernel: Using IPI No-Shortcut mode
Nov 28 19:52:40 client2 kernel: registered taskstats version 1
Nov 28 19:52:40 client2 kernel: No TPM chip found, activating TPM-bypass!
Nov 28 19:52:40 client2 kernel: Magic number: 2:546:861
Nov 28 19:52:40 client2 kernel: rtc_cmos 00:02: setting system clock to 2010-11-29 00:52:25 UTC (1290991945)
Nov 28 19:52:40 client2 kernel: Initalizing network drop monitor service
Nov 28 19:52:40 client2 kernel: *****************************************************************************
Nov 28 19:52:40 client2 kernel: * *
Nov 28 19:52:40 client2 kernel: * REMINDER, the following debugging option is turned on in your .config: *
Nov 28 19:52:40 client2 kernel: * *
Nov 28 19:52:40 client2 kernel: * *
Nov 28 19:52:40 client2 kernel: * it may increase runtime overhead and latencies. *
Nov 28 19:52:40 client2 kernel: * *
Nov 28 19:52:40 client2 kernel: *****************************************************************************
Nov 28 19:52:40 client2 kernel: Freeing unused kernel memory: 528k freed
Nov 28 19:52:40 client2 kernel: Write protecting the kernel text: 3744k
Nov 28 19:52:40 client2 kernel: Write protecting the kernel read-only data: 1720k
Nov 28 19:52:40 client2 kernel: dracut: dracut-005-5.fc12
Nov 28 19:52:40 client2 kernel: udev: starting version 145
Nov 28 19:52:40 client2 kernel: dracut: Starting plymouth daemon
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
Nov 28 19:52:40 client2 kernel: sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
Nov 28 19:52:40 client2 kernel: scsi0 : sata_nv
Nov 28 19:52:40 client2 kernel: scsi1 : sata_nv
Nov 28 19:52:40 client2 kernel: ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 21
Nov 28 19:52:40 client2 kernel: ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 21
Nov 28 19:52:40 client2 kernel: scsi2 : pata_amd
Nov 28 19:52:40 client2 kernel: scsi3 : pata_amd
Nov 28 19:52:40 client2 kernel: ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Nov 28 19:52:40 client2 kernel: ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
Nov 28 19:52:40 client2 kernel: sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
Nov 28 19:52:40 client2 kernel: scsi4 : sata_nv
Nov 28 19:52:40 client2 kernel: scsi5 : sata_nv
Nov 28 19:52:40 client2 kernel: ata5: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 20
Nov 28 19:52:40 client2 kernel: ata6: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 20
Nov 28 19:52:40 client2 kernel: usb 1-4: new high speed USB device using ehci_hcd and address 2
Nov 28 19:52:40 client2 kernel: usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
Nov 28 19:52:40 client2 kernel: usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Nov 28 19:52:40 client2 kernel: usb 1-4: Product: USB2.0 Hub
Nov 28 19:52:40 client2 kernel: usb 1-4: configuration #1 chosen from 1 choice
Nov 28 19:52:40 client2 kernel: hub 1-4:1.0: USB hub found
Nov 28 19:52:40 client2 kernel: hub 1-4:1.0: 4 ports detected
Nov 28 19:52:40 client2 kernel: ata3.00: ATAPI: TSSTcorp CDDVDW TS-H662A, UO00, max UDMA/66
Nov 28 19:52:40 client2 kernel: ata3.00: configured for UDMA/33
Nov 28 19:52:40 client2 kernel: ata5: SATA link down (SStatus 0 SControl 300)
Nov 28 19:52:40 client2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 28 19:52:40 client2 kernel: ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/100
Nov 28 19:52:40 client2 kernel: ata1.00: 488397168 sectors, multi 16: LBA48
Nov 28 19:52:40 client2 kernel: ata1.00: configured for UDMA/100
Nov 28 19:52:40 client2 kernel: scsi 0:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
Nov 28 19:52:40 client2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 28 19:52:40 client2 kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Nov 28 19:52:40 client2 kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 28 19:52:40 client2 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 28 19:52:40 client2 kernel: sda: sda1 sda2
Nov 28 19:52:40 client2 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 28 19:52:40 client2 kernel: usb 2-5: new full speed USB device using ohci_hcd and address 2
Nov 28 19:52:40 client2 kernel: usb 2-5: New USB device found, idVendor=058f, idProduct=9360
Nov 28 19:52:40 client2 kernel: usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 28 19:52:40 client2 kernel: usb 2-5: Product: USB Reader
Nov 28 19:52:40 client2 kernel: usb 2-5: Manufacturer:
Nov 28 19:52:40 client2 kernel: usb 2-5: SerialNumber: 2004888
Nov 28 19:52:40 client2 kernel: usb 2-5: configuration #1 chosen from 1 choice
Nov 28 19:52:40 client2 kernel: Initializing USB Mass Storage driver...
Nov 28 19:52:40 client2 kernel: scsi6 : SCSI emulation for USB Mass Storage devices
Nov 28 19:52:40 client2 kernel: usbcore: registered new interface driver usb-storage
Nov 28 19:52:40 client2 kernel: USB Mass Storage support registered.
Nov 28 19:52:40 client2 kernel: usb 1-4.1: new low speed USB device using ehci_hcd and address 4
Nov 28 19:52:40 client2 kernel: ata2: SATA link down (SStatus 0 SControl 300)
Nov 28 19:52:40 client2 kernel: scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H662A UO00 PQ: 0 ANSI: 5
Nov 28 19:52:40 client2 kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 28 19:52:40 client2 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 28 19:52:40 client2 kernel: sr 2:0:0:0: Attached scsi generic sg1 type 5
Nov 28 19:52:40 client2 kernel: usb 1-4.1: New USB device found, idVendor=0b39, idProduct=0d04
Nov 28 19:52:40 client2 kernel: usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 28 19:52:40 client2 kernel: usb 1-4.1: Product: USB KVM Switch 4 PORT V2.7
Nov 28 19:52:40 client2 kernel: usb 1-4.1: Manufacturer: USB KVM Switch 4 PORT V2.7
Nov 28 19:52:40 client2 kernel: usb 1-4.1: configuration #1 chosen from 1 choice
Nov 28 19:52:40 client2 kernel: input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input3
Nov 28 19:52:40 client2 kernel: generic-usb 0003:0B39:0D04.0001: input,hidraw0: USB HID v1.10 Keyboard [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:02.1-4.1/input0
Nov 28 19:52:40 client2 kernel: input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.1/input/input4
Nov 28 19:52:40 client2 kernel: generic-usb 0003:0B39:0D04.0002: input,hidraw1: USB HID v1.10 Mouse [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:02.1-4.1/input1
Nov 28 19:52:40 client2 kernel: usb 1-4.2: new low speed USB device using ehci_hcd and address 5
Nov 28 19:52:40 client2 kernel: usb 1-4.2: New USB device found, idVendor=13ee, idProduct=0003
Nov 28 19:52:40 client2 kernel: usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 28 19:52:40 client2 kernel: usb 1-4.2: Product: Optical Mouse
Nov 28 19:52:40 client2 kernel: usb 1-4.2: Manufacturer: MosArt
Nov 28 19:52:40 client2 kernel: usb 1-4.2: configuration #1 chosen from 1 choice
Nov 28 19:52:40 client2 kernel: input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input5
Nov 28 19:52:40 client2 kernel: generic-usb 0003:13EE:0003.0003: input,hidraw2: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:02.1-4.2/input0
Nov 28 19:52:40 client2 kernel: usb 1-4.3: new low speed USB device using ehci_hcd and address 6
Nov 28 19:52:40 client2 kernel: ata6: SATA link down (SStatus 0 SControl 300)
Nov 28 19:52:40 client2 kernel: usb 1-4.3: device descriptor read/64, error -32
Nov 28 19:52:40 client2 kernel: usb 1-4.3: device descriptor read/64, error -32
Nov 28 19:52:40 client2 kernel: usb 1-4.3: new low speed USB device using ehci_hcd and address 7
Nov 28 19:52:40 client2 kernel: usb 1-4.3: device descriptor read/64, error -32
Nov 28 19:52:40 client2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 28 19:52:40 client2 kernel: kjournald starting. Commit interval 5 seconds
Nov 28 19:52:40 client2 kernel: dracut: Mounted root filesystem /dev/sda1
Nov 28 19:52:40 client2 kernel: usb 1-4.3: device descriptor read/64, error -32
Nov 28 19:52:40 client2 kernel: dracut: Switching root
Nov 28 19:52:40 client2 kernel: usb 1-4.3: new low speed USB device using ehci_hcd and address 8
Nov 28 19:52:40 client2 kernel: usb 1-4.3: device not accepting address 8, error -32
Nov 28 19:52:40 client2 kernel: usb 1-4.3: new low speed USB device using ehci_hcd and address 9
Nov 28 19:52:40 client2 kernel: usb 1-4.3: device not accepting address 9, error -32
Nov 28 19:52:40 client2 kernel: hub 1-4:1.0: unable to enumerate USB device on port 3
Nov 28 19:52:40 client2 kernel: scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Nov 28 19:52:40 client2 kernel: scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Nov 28 19:52:40 client2 kernel: scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Nov 28 19:52:40 client2 kernel: scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Nov 28 19:52:40 client2 kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 28 19:52:40 client2 kernel: sd 6:0:0:1: Attached scsi generic sg3 type 0
Nov 28 19:52:40 client2 kernel: sd 6:0:0:2: Attached scsi generic sg4 type 0
Nov 28 19:52:40 client2 kernel: sd 6:0:0:3: Attached scsi generic sg5 type 0
Nov 28 19:52:40 client2 kernel: sd 6:0:0:0: [sdb] Attached SCSI removable disk
Nov 28 19:52:40 client2 kernel: sd 6:0:0:3: [sde] Attached SCSI removable disk
Nov 28 19:52:40 client2 kernel: sd 6:0:0:2: [sdd] Attached SCSI removable disk
Nov 28 19:52:40 client2 kernel: sd 6:0:0:1: [sdc] Attached SCSI removable disk
Nov 28 19:52:40 client2 kernel: udev: starting version 145
Nov 28 19:52:40 client2 kernel: parport_pc 00:06: reported by Plug and Play ACPI
Nov 28 19:52:40 client2 kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Nov 28 19:52:40 client2 kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
Nov 28 19:52:40 client2 kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4e00
Nov 28 19:52:40 client2 kernel: ppdev: user-space parallel port driver
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
Nov 28 19:52:40 client2 kernel: ohci1394 0000:01:06.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
Nov 28 19:52:40 client2 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
Nov 28 19:52:40 client2 kernel: forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
Nov 28 19:52:40 client2 kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fbeff000-fbeff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
Nov 28 19:52:40 client2 kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 28 19:52:40 client2 kernel: Disabling lock debugging due to kernel taint
Nov 28 19:52:40 client2 kernel: forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 44:87:fc:5d:95:f3
Nov 28 19:52:40 client2 kernel: forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
Nov 28 19:52:40 client2 kernel: HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
Nov 28 19:52:40 client2 kernel: ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
Nov 28 19:52:40 client2 kernel: nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 18 (level, low) -> IRQ 18
Nov 28 19:52:40 client2 kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.12 Fri Oct 8 13:22:24 PDT 2010
Nov 28 19:52:40 client2 kernel: device-mapper: multipath: version 1.1.0 loaded
Nov 28 19:52:40 client2 kernel: EXT3 FS on sda1, internal journal
Nov 28 19:52:40 client2 kernel: Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
Nov 28 19:52:40 client2 kernel: microcode: CPU0: patch_level=0x1000098
Nov 28 19:52:40 client2 kernel: platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
Nov 28 19:52:40 client2 kernel: microcode: CPU0: cpu revision not listed in equivalent cpu table
Nov 28 19:52:40 client2 kernel: microcode: CPU0: cpu revision not listed in equivalent cpu table
Nov 28 19:52:40 client2 kernel: microcode: CPU1: patch_level=0x1000098
Nov 28 19:52:40 client2 kernel: platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
Nov 28 19:52:40 client2 kernel: microcode: CPU1: cpu revision not listed in equivalent cpu table
Nov 28 19:52:40 client2 kernel: microcode: CPU1: cpu revision not listed in equivalent cpu table
Nov 28 19:52:40 client2 kernel: Microcode Update Driver: v2.00 , Peter Oruba
Nov 28 19:52:40 client2 kernel: powernow-k8: Found 1 AMD Athlon(tm) II X2 255 Processor processors (2 cpu cores) (version 2.20.00)
Nov 28 19:52:40 client2 kernel: powernow-k8: 0 : pstate 0 (3100 MHz)
Nov 28 19:52:40 client2 kernel: powernow-k8: 1 : pstate 1 (2400 MHz)
Nov 28 19:52:40 client2 kernel: powernow-k8: 2 : pstate 2 (1900 MHz)
Nov 28 19:52:40 client2 kernel: powernow-k8: 3 : pstate 3 (800 MHz)
Nov 28 19:52:40 client2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov 28 19:52:41 client2 kernel: NET: Registered protocol family 10
Nov 28 19:52:41 client2 kernel: lo: Disabled Privacy Extensions
Nov 28 19:52:42 client2 avahi-daemon[941]: Found user 'avahi' (UID 498) and group 'avahi' (GID 490).
Nov 28 19:52:42 client2 avahi-daemon[941]: Successfully dropped root privileges.
Nov 28 19:52:42 client2 avahi-daemon[941]: avahi-daemon 0.6.25 starting up.
Nov 28 19:52:42 client2 avahi-daemon[941]: Successfully called chroot().
Nov 28 19:52:42 client2 avahi-daemon[941]: Successfully dropped remaining capabilities.
Nov 28 19:52:42 client2 avahi-daemon[941]: Loading service file /services/ssh.service.
Nov 28 19:52:42 client2 avahi-daemon[941]: Network interface enumeration completed.
Nov 28 19:52:42 client2 avahi-daemon[941]: Registering HINFO record with values 'I686'/'LINUX'.
Nov 28 19:52:42 client2 avahi-daemon[941]: Server startup complete. Host name is client2.local. Local service cookie is 3461520030.
Nov 28 19:52:42 client2 avahi-daemon[941]: Service "client2" (/services/ssh.service) successfully established.
Nov 28 19:52:42 client2 rpc.statd[959]: Version 1.2.1 Starting
Nov 28 19:52:43 client2 kernel: RPC: Registered udp transport module.
Nov 28 19:52:43 client2 kernel: RPC: Registered tcp transport module.
Nov 28 19:52:44 client2 acpid: starting up
Nov 28 19:52:44 client2 acpid: 1 rule loaded
Nov 28 19:52:44 client2 acpid: waiting for events: event logging is off
Nov 28 19:52:45 client2 acpid: client connected from 1163[68:478]
Nov 28 19:52:45 client2 acpid: 1 client rule loaded
Nov 28 19:52:46 client2 pcscd: pcscdaemon.c:506:main() pcsc-lite 1.5.2 daemon ready.
Nov 28 19:52:46 client2 NetworkManager[1192]: NetworkManager (version 0.8.1-9.git20100831.fc12) is starting...
Nov 28 19:52:46 client2 NetworkManager[1192]: Read config file /etc/NetworkManager/NetworkManager.conf
Nov 28 19:52:47 client2 NetworkManager[1192]: VPN: loaded org.freedesktop.NetworkManager.openvpn
Nov 28 19:52:47 client2 NetworkManager[1192]: VPN: loaded org.freedesktop.NetworkManager.pptp
Nov 28 19:52:47 client2 NetworkManager[1192]: VPN: loaded org.freedesktop.NetworkManager.openconnect
Nov 28 19:52:47 client2 NetworkManager[1192]: VPN: loaded org.freedesktop.NetworkManager.vpnc
Nov 28 19:52:47 client2 NetworkManager[1192]: trying to start the modem manager...
Nov 28 19:52:47 client2 NetworkManager[1192]: monitoring kernel firmware directory '/lib/firmware'.
Nov 28 19:52:47 client2 NetworkManager[1192]: ifcfg-rh: Acquired D-Bus service com.redhat.ifcfgrh1
Nov 28 19:52:47 client2 NetworkManager[1192]: Loaded plugin ifcfg-rh: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Nov 28 19:52:47 client2 NetworkManager[1192]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ...
Nov 28 19:52:47 client2 NetworkManager[1192]: ifcfg-rh: read connection 'System eth0'
Nov 28 19:52:47 client2 NetworkManager[1192]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
Nov 28 19:52:47 client2 NetworkManager[1192]: WiFi enabled by radio killswitch; enabled by state file
Nov 28 19:52:47 client2 NetworkManager[1192]: WWAN enabled by radio killswitch; enabled by state file
Nov 28 19:52:47 client2 NetworkManager[1192]: WiMAX enabled by radio killswitch; enabled by state file
Nov 28 19:52:47 client2 NetworkManager[1192]: Networking is enabled by state file
Nov 28 19:52:47 client2 modem-manager: ModemManager (version 0.4-5.git20100720.fc12) starting...
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Longcheer
Nov 28 19:52:47 client2 modem-manager: Loaded plugin SimTech
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Huawei
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Gobi
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Option
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Sierra
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Generic
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Nokia
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Novatel
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Option High-Speed
Nov 28 19:52:47 client2 modem-manager: Loaded plugin ZTE
Nov 28 19:52:47 client2 modem-manager: Loaded plugin Ericsson MBM
Nov 28 19:52:47 client2 modem-manager: Loaded plugin AnyData
Nov 28 19:52:47 client2 modem-manager: Loaded plugin MotoC
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): carrier is OFF
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): new Ethernet device (driver: 'forcedeth' ifindex: 2)
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): now managed
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): device state change: 1 -> 2 (reason 2)
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): bringing up device.
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): preparing device.
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): deactivating device (reason: 2).
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): carrier now ON (device state 2)
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): device state change: 2 -> 3 (reason 40)
Nov 28 19:52:47 client2 NetworkManager[1192]: bluez error getting default adapter: The name org.bluez was not provided by any .service files
Nov 28 19:52:47 client2 NetworkManager[1192]: modem-manager is now available
Nov 28 19:52:47 client2 NetworkManager[1192]: Trying to start the supplicant...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) starting connection 'System eth0'
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): device state change: 3 -> 4 (reason 0)
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): device state change: 4 -> 5 (reason 0)
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Nov 28 19:52:47 client2 NetworkManager[1192]: (eth0): device state change: 5 -> 7 (reason 0)
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Nov 28 19:52:47 client2 NetworkManager[1192]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Nov 28 19:52:47 client2 avahi-daemon[941]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.255.252.
Nov 28 19:52:47 client2 avahi-daemon[941]: New relevant interface eth0.IPv4 for mDNS.
Nov 28 19:52:47 client2 avahi-daemon[941]: Registering new address record for 192.168.255.252 on eth0.IPv4.
Nov 28 19:52:47 client2 ntpd[1216]: ntpd 4.2.4p8@1.1612-o Wed Dec 9 11:49:22 UTC 2009 (1)
Nov 28 19:52:47 client2 ntpd[1217]: precision = 2.240 usec
Nov 28 19:52:47 client2 ntpd[1217]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Nov 28 19:52:47 client2 ntpd[1217]: Listening on interface #1 wildcard, ::#123 Disabled
Nov 28 19:52:47 client2 ntpd[1217]: Listening on interface #2 lo, ::1#123 Enabled
Nov 28 19:52:47 client2 ntpd[1217]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Nov 28 19:52:47 client2 ntpd[1217]: Listening on interface #4 eth0, 192.168.255.252#123 Enabled
Nov 28 19:52:47 client2 ntpd[1217]: Listening on routing socket on fd #21 for interface updates
Nov 28 19:52:47 client2 ntpd[1217]: kernel time sync status 2040
Nov 28 19:52:47 client2 ntpd[1217]: frequency initialized 32.830 PPM from /var/lib/ntp/drift
Nov 28 19:52:48 client2 NetworkManager[1192]: (eth0): device state change: 7 -> 8 (reason 0)
Nov 28 19:52:48 client2 NetworkManager[1192]: Policy set 'System eth0' (eth0) as default for IPv4 routing and DNS.
Nov 28 19:52:48 client2 NetworkManager[1192]: Activation (eth0) successful, device activated.
Nov 28 19:52:48 client2 NetworkManager[1192]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Nov 28 19:52:48 client2 avahi-daemon[941]: Registering new address record for fe80::4687:fcff:fe5d:95f3 on eth0.*.
Nov 28 19:52:49 client2 abrtd: Registered Analyzer plugin 'Python'
Nov 28 19:52:49 client2 abrtd: Registered Reporter plugin 'Logger'
Nov 28 19:52:49 client2 abrtd: Registered Reporter plugin 'KerneloopsReporter'
Nov 28 19:52:49 client2 abrtd: Registered Analyzer plugin 'CCpp'
Nov 28 19:52:49 client2 abrtd: Registered Action plugin 'KerneloopsScanner'
Nov 28 19:52:49 client2 abrtd: Registered Reporter plugin 'Bugzilla'
Nov 28 19:52:49 client2 abrtd: Registered Analyzer plugin 'Kerneloops'
Nov 28 19:52:49 client2 abrtd: Checking for unsaved crashes (dirs to check:23)
Nov 28 19:52:49 client2 /usr/sbin/gpm[1314]: *** info [daemon/startup.c(136)]:
Nov 28 19:52:49 client2 /usr/sbin/gpm[1314]: Started gpm successfully. Entered daemon mode.
Nov 28 19:52:49 client2 abrtd: Registered Database plugin 'SQLite3'
Nov 28 19:52:50 client2 ntpd[1217]: Listening on interface #5 eth0, fe80::4687:fcff:fe5d:95f3#123 Enabled
Nov 28 19:52:50 client2 abrtd: Done checking for unsaved crashes
Nov 28 19:52:50 client2 abrtd: Init complete, entering main loop
Nov 28 19:52:51 client2 smbd[1431]: [2010/11/28 19:52:51, 0] smbd/server.c:457(smbd_open_one_socket)
Nov 28 19:52:51 client2 smbd[1431]: smbd_open_once_socket: open_socket_in: Address already in use
Nov 28 19:52:51 client2 smbd[1431]: [2010/11/28 19:52:51, 0] smbd/server.c:457(smbd_open_one_socket)
Nov 28 19:52:51 client2 smbd[1431]: smbd_open_once_socket: open_socket_in: Address already in use
Nov 28 19:52:51 client2 kernel: ieee1394: raw1394: /dev/raw1394 device initialized
Nov 28 19:52:55 client2 acpid: client connected from 1478[0:0]
Nov 28 19:52:55 client2 acpid: 1 client rule loaded
Nov 28 19:53:18 client2 gnome-keyring-daemon[1510]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Nov 28 19:53:20 client2 rtkit-daemon[1748]: Sucessfully made thread 1746 of process 1746 (/usr/bin/pulseaudio) owned by '502' high priority at nice level -11.
Nov 28 19:53:20 client2 pulseaudio[1746]: pid.c: Stale PID file, overwriting.
Nov 28 19:53:22 client2 rtkit-daemon[1748]: Sucessfully made thread 1811 of process 1811 (/usr/bin/pulseaudio) owned by '502' high priority at nice level -11.
Nov 28 19:53:22 client2 pulseaudio[1811]: pid.c: Daemon already running.
Nov 28 19:53:22 client2 kernel: fuse init (API version 7.12)
Nov 28 19:53:26 client2 setroubleshoot: SELinux not enabled, setroubleshootd exiting...
Nov 28 19:56:39 client2 ntpd[1217]: synchronized to 38.229.71.1, stratum 2
Nov 28 19:56:39 client2 ntpd[1217]: time reset -0.351901 s
Nov 28 19:56:39 client2 ntpd[1217]: kernel time sync status change 2001
Nov 28 20:01:20 client2 ntpd[1217]: synchronized to 38.229.71.1, stratum 2
Nov 28 21:01:01 client2 kernel: jackd[2518]: segfault at 0 ip 4496fdb6 sp b76dd0f0 error 4 in libffado.so.2.0.0[448bb000+179000]
Nov 28 21:01:02 client2 abrt[3152]: saved core dump of pid 2506 (/usr/bin/jackd) to /var/spool/abrt/ccpp-1290996061-2506.new/coredump (67883008 bytes)
Nov 28 21:01:02 client2 abrtd: Directory 'ccpp-1290996061-2506' creation detected
Nov 28 21:01:02 client2 abrtd: Package 'jack-audio-connection-kit' isn't signed with proper key
Nov 28 21:01:02 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290996061-2506 (res:5), deleting
Nov 28 21:09:55 client2 kernel: jackd[3248]: segfault at 0 ip 4496fdb6 sp b76430f0 error 4 in libffado.so.2.0.0[448bb000+179000]
Nov 28 21:09:56 client2 abrt[3315]: saved core dump of pid 3236 (/usr/bin/jackd) to /var/spool/abrt/ccpp-1290996595-3236.new/coredump (67907584 bytes)
Nov 28 21:09:56 client2 abrtd: Directory 'ccpp-1290996595-3236' creation detected
Nov 28 21:09:56 client2 abrtd: Package 'jack-audio-connection-kit' isn't signed with proper key
Nov 28 21:09:56 client2 abrtd: Corrupted or bad crash /var/spool/abrt/ccpp-1290996595-3236 (res:5), deleting
Nov 28 21:11:33 client2 NetworkManager[1192]: [1290996693.720117] [nm-manager.c:1331] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of name 'org.freedesktop.NetworkManagerUserSettings': no such name
Nov 28 21:11:34 client2 init: tty4 main process (1468) killed by TERM signal
Nov 28 21:11:34 client2 init: tty5 main process (1469) killed by TERM signal
Nov 28 21:11:34 client2 init: tty2 main process (1470) killed by TERM signal
Nov 28 21:11:34 client2 init: tty3 main process (1471) killed by TERM signal
Nov 28 21:11:34 client2 init: tty6 main process (1472) killed by TERM signal
Nov 28 21:11:34 client2 avahi-daemon[941]: Got SIGTERM, quitting.
Nov 28 21:11:34 client2 avahi-daemon[941]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.255.252.
Nov 28 21:11:35 client2 abrtd: UnRegistered Reporter plugin Bugzilla
Nov 28 21:11:35 client2 abrtd: UnRegistered Analyzer plugin CCpp
Nov 28 21:11:35 client2 abrtd: UnRegistered Analyzer plugin Kerneloops
Nov 28 21:11:35 client2 abrtd: UnRegistered Reporter plugin KerneloopsReporter
Nov 28 21:11:35 client2 abrtd: UnRegistered Action plugin KerneloopsScanner
Nov 28 21:11:35 client2 abrtd: UnRegistered Reporter plugin Logger
Nov 28 21:11:35 client2 abrtd: UnRegistered Analyzer plugin Python
Nov 28 21:11:35 client2 abrtd: UnRegistered Database plugin SQLite3
Nov 28 21:11:35 client2 abrtd: Got signal 15, exiting
Nov 28 21:11:38 client2 acpid: exiting
Nov 28 21:11:38 client2 ntpd[1217]: ntpd exiting on signal 15
Nov 28 21:11:38 client2 pcscd: pcscdaemon.c:581:signal_trap() Preparing for suicide
Nov 28 21:11:39 client2 pcscd: readerfactory.c:1242:RFCleanupReaders() entering cleaning function
Nov 28 21:11:39 client2 pcscd: pcscdaemon.c:531:at_exit() cleaning /var/run
Nov 28 21:11:39 client2 NetworkManager[1192]: caught signal 15, shutting down normally.
Nov 28 21:11:40 client2 NetworkManager[1192]: exiting (success)
Nov 28 21:11:41 client2 rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Nov 28 21:11:41 client2 auditd[847]: Error sending signal_info request (Operation not supported)
Nov 28 21:11:41 client2 auditd[847]: The audit daemon is exiting.
Nov 28 21:11:41 client2 kernel: type=1305 audit(1290996701.462:45): audit_pid=0 old=847 auid=4294967295 ses=4294967295 res=1
Nov 28 21:11:41 client2 cpuspeed: Disabling ondemand cpu frequency scaling governor
Nov 28 21:11:42 client2 kernel: Kernel logging (proc) stopped.
Nov 28 21:12:27 client2 kernel: imklog 4.4.2, log source = /proc/kmsg started.
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys cpuset
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys cpu
Nov 28 21:12:27 client2 kernel: Linux version 2.6.31.12-1.rt20.1.fc12.ccrma.i686.rtPAE (mockbuild@planetforge.stanford.edu) (gcc version 4.4.2 20091222 (Red Hat 4.4.2-20) (GCC) ) #1 SMP PREEMPT RT Thu Jan 21 22:07:32 EST 2010
Nov 28 21:12:27 client2 kernel: KERNEL supported cpus:
Nov 28 21:12:27 client2 kernel: Intel GenuineIntel
Nov 28 21:12:27 client2 kernel: AMD AuthenticAMD
Nov 28 21:12:27 client2 kernel: NSC Geode by NSC
Nov 28 21:12:27 client2 kernel: Cyrix CyrixInstead
Nov 28 21:12:27 client2 kernel: Centaur CentaurHauls
Nov 28 21:12:27 client2 kernel: Transmeta GenuineTMx86
Nov 28 21:12:27 client2 kernel: Transmeta TransmetaCPU
Nov 28 21:12:27 client2 kernel: UMC UMC UMC UMC
Nov 28 21:12:27 client2 kernel: BIOS-provided physical RAM map:
Nov 28 21:12:27 client2 kernel: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov 28 21:12:27 client2 kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Nov 28 21:12:27 client2 kernel: DMI present.
Nov 28 21:12:27 client2 kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Nov 28 21:12:27 client2 kernel: last_pfn = 0x130000 max_arch_pfn = 0x1000000
Nov 28 21:12:27 client2 kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 28 21:12:27 client2 kernel: init_memory_mapping: 0000000000000000-00000000375fe000
Nov 28 21:12:27 client2 kernel: NX (Execute Disable) protection: active
Nov 28 21:12:27 client2 kernel: RAMDISK: 374e2000 - 37fef780
Nov 28 21:12:27 client2 kernel: Allocated new RAMDISK: 00b56000 - 01663780
Nov 28 21:12:27 client2 kernel: Move RAMDISK from 00000000374e2000 - 0000000037fef77f to 00b56000 - 0166377f
Nov 28 21:12:27 client2 kernel: ACPI: RSDP 000faca0 00014 (v00 ACPIAM)
Nov 28 21:12:27 client2 kernel: ACPI: RSDT cffc0000 00040 (v01 090909 RSDT1450 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: FACP cffc0200 00084 (v01 090909 FACP1450 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: DSDT cffc04a0 0495E (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
Nov 28 21:12:27 client2 kernel: ACPI: FACS cffce000 00040
Nov 28 21:12:27 client2 kernel: ACPI: APIC cffc0390 00080 (v01 090909 APIC1450 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: MCFG cffc0410 0003C (v01 090909 OEMMCFG 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: WDRT cffc0450 00047 (v01 090909 NV-WDRT 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: OEMB cffce040 00072 (v01 090909 OEMB1450 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: HPET cffc4e00 00038 (v01 090909 OEMHPET0 20090909 MSFT 00000097)
Nov 28 21:12:27 client2 kernel: ACPI: SSDT cffc4e40 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
Nov 28 21:12:27 client2 kernel: 3978MB HIGHMEM available.
Nov 28 21:12:27 client2 kernel: 885MB LOWMEM available.
Nov 28 21:12:27 client2 kernel: mapped low ram: 0 - 375fe000
Nov 28 21:12:27 client2 kernel: low ram: 0 - 375fe000
Nov 28 21:12:27 client2 kernel: node 0 low ram: 00000000 - 375fe000
Nov 28 21:12:27 client2 kernel: node 0 bootmap 00014000 - 0001aec0
Nov 28 21:12:27 client2 kernel: (9 early reservations) ==> bootmem [0000000000 - 00375fe000]
Nov 28 21:12:27 client2 kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Nov 28 21:12:27 client2 kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Nov 28 21:12:27 client2 kernel: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Nov 28 21:12:27 client2 kernel: #3 [0000400000 - 0000b4cfb0] TEXT DATA BSS ==> [0000400000 - 0000b4cfb0]
Nov 28 21:12:27 client2 kernel: #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
Nov 28 21:12:27 client2 kernel: #5 [0000b4d000 - 0000b550db] BRK ==> [0000b4d000 - 0000b550db]
Nov 28 21:12:27 client2 kernel: #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
Nov 28 21:12:27 client2 kernel: #7 [0000b56000 - 0001663780] NEW RAMDISK ==> [0000b56000 - 0001663780]
Nov 28 21:12:27 client2 kernel: #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
Nov 28 21:12:27 client2 kernel: found SMP MP-table at [c00ff780] ff780
Nov 28 21:12:27 client2 kernel: Zone PFN ranges:
Nov 28 21:12:27 client2 kernel: DMA 0x00000010 -> 0x00001000
Nov 28 21:12:27 client2 kernel: Normal 0x00001000 -> 0x000375fe
Nov 28 21:12:27 client2 kernel: HighMem 0x000375fe -> 0x00130000
Nov 28 21:12:27 client2 kernel: Movable zone start PFN for each node
Nov 28 21:12:27 client2 kernel: early_node_map[3] active PFN ranges
Nov 28 21:12:27 client2 kernel: 0: 0x00000010 -> 0x0000009f
Nov 28 21:12:27 client2 kernel: 0: 0x00000100 -> 0x000cffc0
Nov 28 21:12:27 client2 kernel: 0: 0x00100000 -> 0x00130000
Nov 28 21:12:27 client2 kernel: Using APIC driver default
Nov 28 21:12:27 client2 kernel: ACPI: PM-Timer IO Port: 0x4008
Nov 28 21:12:27 client2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 28 21:12:27 client2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 28 21:12:27 client2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 28 21:12:27 client2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 28 21:12:27 client2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 28 21:12:27 client2 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Nov 28 21:12:27 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 28 21:12:27 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 28 21:12:27 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Nov 28 21:12:27 client2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Nov 28 21:12:27 client2 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 28 21:12:27 client2 kernel: Using ACPI (MADT) for SMP configuration information
Nov 28 21:12:27 client2 kernel: ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Nov 28 21:12:27 client2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov 28 21:12:27 client2 kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Nov 28 21:12:27 client2 kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Nov 28 21:12:27 client2 kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Nov 28 21:12:27 client2 kernel: Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Nov 28 21:12:27 client2 kernel: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
Nov 28 21:12:27 client2 kernel: PERCPU: Embedded 14 pages at c3c92000, static data 34180 bytes
Nov 28 21:12:27 client2 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038670
Nov 28 21:12:27 client2 kernel: Kernel command line: ro root=UUID=92ef6280-9b9a-48a3-8c88-403d3796e1a8 nomodeset LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet vga=792 selinux=0
Nov 28 21:12:27 client2 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 28 21:12:27 client2 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 28 21:12:27 client2 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 28 21:12:27 client2 kernel: Enabling fast FPU save and restore... done.
Nov 28 21:12:27 client2 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 28 21:12:27 client2 kernel: Initializing CPU#0
Nov 28 21:12:27 client2 kernel: allocated 59768064 bytes of page_cgroup
Nov 28 21:12:27 client2 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 28 21:12:27 client2 kernel: Initializing HighMem for node 0 (000375fe:00130000)
Nov 28 21:12:27 client2 kernel: Memory: 4075396k/4980736k available (3740k kernel code, 117344k reserved, 2307k data, 528k init, 3286792k highmem)
Nov 28 21:12:27 client2 kernel: virtual kernel memory layout:
Nov 28 21:12:27 client2 kernel: fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
Nov 28 21:12:27 client2 kernel: pkmap : 0xff600000 - 0xff800000 (2048 kB)
Nov 28 21:12:27 client2 kernel: vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
Nov 28 21:12:27 client2 kernel: lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
Nov 28 21:12:27 client2 kernel: .init : 0xc09e9000 - 0xc0a6d000 ( 528 kB)
Nov 28 21:12:27 client2 kernel: .data : 0xc07a73f9 - 0xc09e8110 (2307 kB)
Nov 28 21:12:27 client2 kernel: .text : 0xc0400000 - 0xc07a73f9 (3740 kB)
Nov 28 21:12:27 client2 kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 28 21:12:27 client2 kernel: Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Nov 28 21:12:27 client2 kernel: Preemptible RCU implementation.
Nov 28 21:12:27 client2 kernel: NR_IRQS:1280
Nov 28 21:12:27 client2 kernel: Fast TSC calibration using PIT
Nov 28 21:12:27 client2 kernel: Detected 3113.898 MHz processor.
Nov 28 21:12:27 client2 kernel: Console: colour dummy device 80x25
Nov 28 21:12:27 client2 kernel: console [tty0] enabled
Nov 28 21:12:27 client2 kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Nov 28 21:12:27 client2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6227.79 BogoMIPS (lpj=3113898)
Nov 28 21:12:27 client2 kernel: Security Framework initialized
Nov 28 21:12:27 client2 kernel: SELinux: Disabled at boot.
Nov 28 21:12:27 client2 kernel: Mount-cache hash table entries: 512
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys ns
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys cpuacct
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys memory
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys devices
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys freezer
Nov 28 21:12:27 client2 kernel: Initializing cgroup subsys net_cls
Nov 28 21:12:27 client2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 28 21:12:27 client2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Nov 28 21:12:27 client2 kernel: CPU: Physical Processor ID: 0
Nov 28 21:12:27 client2 kernel: CPU: Processor Core ID: 0
Nov 28 21:12:27 client2 kernel: mce: CPU supports 6 MCE banks
Nov 28 21:12:27 client2 kernel: using C1E aware idle routine
Nov 28 21:12:27 client2 kernel: Performance Counters: AMD PMU driver.
Nov 28 21:12:27 client2 kernel: ... version: 0
Nov 28 21:12:27 client2 kernel: ... bit width: 48
Nov 28 21:12:27 client2 kernel: ... generic counters: 4
Nov 28 21:12:27 client2 kernel: ... value mask: 0000ffffffffffff
Nov 28 21:12:27 client2 kernel: ... max period: 00007fffffffffff
Nov 28 21:12:27 client2 kernel: ... fixed-purpose counters: 0
Nov 28 21:12:27 client2 kernel: ... counter mask: 000000000000000f
Nov 28 21:12:27 client2 kernel: Checking 'hlt' instruction... OK.
Nov 28 21:12:27 client2 kernel: ACPI: Core revision 20090521
Nov 28 21:12:27 client2 kernel: ftrace: converting mcount calls to 0f 1f 44 00 00
Nov 28 21:12:27 client2 kernel: ftrace: allocating 22437 entries in 44 pages
Nov 28 21:12:27 client2 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 28 21:12:27 client2 kernel: CPU0: AMD Athlon(tm) II X2 255 Processor stepping 02
Nov 28 21:12:27 client2 kernel: Booting processor 1 APIC 0x1 ip 0x6000
Nov 28 21:12:27 client2 kernel: Initializing CPU#1
Nov 28 21:12:27 client2 kernel: Calibrating delay using timer specific routine.. 6228.18 BogoMIPS (lpj=3114093)
Nov 28 21:12:27 client2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 28 21:12:27 client2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Nov 28 21:12:27 client2 kernel: CPU: Physical Processor ID: 0
Nov 28 21:12:27 client2 kernel: CPU: Processor Core ID: 1
Nov 28 21:12:27 client2 kernel: mce: CPU supports 6 MCE banks
Nov 28 21:12:27 client2 kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Nov 28 21:12:27 client2 kernel: CPU1: AMD Athlon(tm) II X2 255 Processor stepping 02
Nov 28 21:12:27 client2 kernel: checking TSC synchronization [CPU#0 -> CPU#1]:
Nov 28 21:12:27 client2 kernel: Measured 55622638423 cycles TSC warp between CPUs, turning off TSC clock.
Nov 28 21:12:27 client2 kernel: Marking TSC unstable due to check_tsc_sync_source failed
Nov 28 21:12:27 client2 kernel: Brought up 2 CPUs
Nov 28 21:12:27 client2 kernel: Total of 2 processors activated (12455.98 BogoMIPS).
Nov 28 21:12:27 client2 kernel: Booting paravirtualized kernel on bare hardware
Nov 28 21:12:27 client2 kernel: regulator: core version 0.5
Nov 28 21:12:27 client2 kernel: Time: 2:12:11 Date: 11/29/10
Nov 28 21:12:27 client2 kernel: NET: Registered protocol family 16
Nov 28 21:12:27 client2 kernel: ACPI: bus type pci registered
Nov 28 21:12:27 client2 kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Nov 28 21:12:27 client2 kernel: PCI: Not using MMCONFIG.
Nov 28 21:12:27 client2 kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
Nov 28 21:12:27 client2 kernel: PCI: Using configuration type 1 for base access
Nov 28 21:12:27 client2 kernel: PCI: Using configuration type 1 for extended access
Nov 28 21:12:27 client2 kernel: bio: create slab at 0
Nov 28 21:12:27 client2 kernel: ACPI: Interpreter enabled
Nov 28 21:12:27 client2 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 28 21:12:27 client2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 28 21:12:27 client2 kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Nov 28 21:12:27 client2 kernel: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Nov 28 21:12:27 client2 kernel: PCI: Using MMCONFIG for extended config space
Nov 28 21:12:27 client2 kernel: ACPI Warning: Incorrect checksum in table [OEMB] - E2, should be DD 20090521 tbutils-246
Nov 28 21:12:27 client2 kernel: ACPI: No dock devices found.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 28 21:12:27 client2 kernel: pci 0000:00:01.1: PME# supported from D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:01.1: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:02.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:02.1: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:05.0: PME# supported from D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:05.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:07.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:09.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:0b.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 28 21:12:27 client2 kernel: pci 0000:00:0c.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
Nov 28 21:12:27 client2 kernel: pci 0000:01:06.0: PME# disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:04.0: transparent bridge
Nov 28 21:12:27 client2 kernel: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
Nov 28 21:12:27 client2 kernel: ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Nov 28 21:12:27 client2 kernel: SCSI subsystem initialized
Nov 28 21:12:27 client2 kernel: usbcore: registered new interface driver usbfs
Nov 28 21:12:27 client2 kernel: usbcore: registered new interface driver hub
Nov 28 21:12:27 client2 kernel: usbcore: registered new device driver usb
Nov 28 21:12:27 client2 kernel: PCI: Using ACPI for IRQ routing
Nov 28 21:12:27 client2 kernel: NetLabel: Initializing
Nov 28 21:12:27 client2 kernel: NetLabel: domain hash size = 128
Nov 28 21:12:27 client2 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 28 21:12:27 client2 kernel: NetLabel: unlabeled traffic allowed by default
Nov 28 21:12:27 client2 kernel: hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
Nov 28 21:12:27 client2 kernel: hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Nov 28 21:12:27 client2 kernel: pnp: PnP ACPI init
Nov 28 21:12:27 client2 kernel: ACPI: bus type pnp registered
Nov 28 21:12:27 client2 kernel: pnp: PnP ACPI: found 13 devices
Nov 28 21:12:27 client2 kernel: ACPI: ACPI bus type pnp unregistered
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x800-0x80f has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4000-0x407f has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4080-0x40ff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4400-0x447f has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4480-0x44ff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4800-0x487f has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4880-0x48ff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4c00-0x4c7f has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: ioport range 0x4c80-0x4cff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: iomem range 0xfec80000-0x1fd93ffff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:0a: ioport range 0xa00-0xadf has been reserved
Nov 28 21:12:27 client2 kernel: system 00:0a: ioport range 0xae0-0xaef has been reserved
Nov 28 21:12:27 client2 kernel: system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
Nov 28 21:12:27 client2 kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
Nov 28 21:12:27 client2 kernel: system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
Nov 28 21:12:27 client2 kernel: pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
Nov 28 21:12:27 client2 kernel: pci 0000:00:04.0: IO window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:04.0: MEM window: 0xfbe00000-0xfbefffff
Nov 28 21:12:27 client2 kernel: pci 0000:00:04.0: PREFETCH window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
Nov 28 21:12:27 client2 kernel: pci 0000:00:09.0: IO window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:09.0: MEM window: 0xfbf00000-0xfdffffff
Nov 28 21:12:27 client2 kernel: pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
Nov 28 21:12:27 client2 kernel: pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
Nov 28 21:12:27 client2 kernel: pci 0000:00:0b.0: IO window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:0b.0: MEM window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:0b.0: PREFETCH window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
Nov 28 21:12:27 client2 kernel: pci 0000:00:0c.0: IO window: disabled
Nov 28 21:12:27 client2 kernel: pci 0000:00:0c.0: MEM window: 0xfe000000-0xfe0fffff
Nov 28 21:12:27 client2 kernel: pci 0000:00:0c.0: PREFETCH window: disabled
Nov 28 21:12:27 client2 kernel: NET: Registered protocol family 2
Nov 28 21:12:27 client2 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 28 21:12:27 client2 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 28 21:12:27 client2 kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
Nov 28 21:12:27 client2 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 28 21:12:27 client2 kernel: TCP reno registered
Nov 28 21:12:27 client2 kernel: NET: Registered protocol family 1
Nov 28 21:12:27 client2 kernel: Trying to unpack rootfs image as initramfs...
Nov 28 21:12:27 client2 kernel: Freeing initrd memory: 11317k freed
Nov 28 21:12:27 client2 kernel: apm: BIOS not found.
Nov 28 21:12:27 client2 kernel: audit: initializing netlink socket (disabled)
Nov 28 21:12:27 client2 kernel: type=2000 audit(1290996730.425:1): initialized
Nov 28 21:12:27 client2 kernel: Warning: could not register the kmem tracer
Nov 28 21:12:27 client2 kernel: highmem bounce pool size: 64 pages
Nov 28 21:12:27 client2 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 28 21:12:27 client2 kernel: VFS: Disk quotas dquot_6.5.2
Nov 28 21:12:27 client2 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 28 21:12:27 client2 kernel: msgmni has been set to 1564
Nov 28 21:12:27 client2 kernel: alg: No test for stdrng (krng)
Nov 28 21:12:27 client2 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 28 21:12:27 client2 kernel: io scheduler noop registered
Nov 28 21:12:27 client2 kernel: io scheduler anticipatory registered
Nov 28 21:12:27 client2 kernel: io scheduler deadline registered
Nov 28 21:12:27 client2 kernel: io scheduler cfq registered (default)
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 28 21:12:27 client2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 28 21:12:27 client2 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 28 21:12:27 client2 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 28 21:12:27 client2 kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf7e80000, using 6144k, total 65536k
Nov 28 21:12:27 client2 kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=1
Nov 28 21:12:27 client2 kernel: vesafb: protected mode interface info at c000:c6e0
Nov 28 21:12:27 client2 kernel: vesafb: pmi: set display start = c00cc716, set palette = c00cc780
Nov 28 21:12:27 client2 kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Nov 28 21:12:27 client2 kernel: vesafb: scrolling: redraw
Nov 28 21:12:27 client2 kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Nov 28 21:12:27 client2 kernel: fbcon: VESA VGA (fb0) is primary device
Nov 28 21:12:27 client2 kernel: Console: switching to colour frame buffer device 128x48
Nov 28 21:12:27 client2 kernel: fb0: VESA VGA frame buffer device
Nov 28 21:12:27 client2 kernel: input: Power

2 December, 2010 - 08:50 — rncbc

Re: I believe this to be a firewire issue (FFADO)

i also agree this could be systemic to the jack/firewire (ffado) interface, specially re. that some or all capture ports have distinct latency added relative to each other.

ardour does have some magic to compensate for this disparate port latency when recording, provided the firewire jack backend fills in each port latency properties in its own right.

qtractor doesn't give a damn to latency compensation, yet. you'll have to bump recorded audio clip offsets to replicate ardours compensation, i guess :) well, that is to say that latency compensation is a completely manual operation on qtractor.

did your friend said that it is using two (2) firewire devices, probably in a daisy-chain setup ? i'll suspect the trouble is in that circumstance--half of the total input ports may get somewhat delayed (ie. fixed latency) when compared to the other half.

ask your friend to try with only one device at a time, probably recording only 8 tracks at once, and see what gives?

also, please, show here the complete output of `jack_lsp -plL` ...

cheers

2 December, 2010 - 23:06 — nobody (not verified)

Two FW Devices

Rui,
Indeed he (Karl) is using two devices daisy chained together. He is going to try still using both, but not daisy chained...using separate ports on the PCI card. I'll let you know the results, and send you his jack_lsp output.

Lex

11 December, 2010 - 01:25 — lexridge (not verified)

Finally got his output

Hi Rui,
sorry for the week delay. I finally got the info you requested from Karl.

-------clip------

This is code from rtirq where we added ohci1394 to it.

# IRQ thread service names
# (space separated list, from higher to lower priority).
RTIRQ_NAME_LIST="rtc snd usb i8042 ohci1394"

This is the output of jack_lsp. I'm running jack with 64ms latency, 1024, with 3 buffers. Not getting any xruns. Vocals on inputs 1-5 are not in sync.

[karl@client2 ~]$ jack_lsp -plL
system:AC0_dev0_Unknown
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC1_dev0_Unknown0
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC2_dev0_Unknown1
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC3_dev0_Unknown2
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC4_dev0_Unknown3
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC5_dev0_Unknown4
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC6_dev0_Unknown5
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC7_dev0_Unknown6
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC8_dev0_Unknown7
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC9_dev0_Unknown8
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC10_dev0_Unknown9
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC11_dev0_Unknown10
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:MC12_dev0_Unknown11
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC13_dev1_Unknown
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC14_dev1_Unknown0
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC15_dev1_Unknown1
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC16_dev1_Unknown2
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC17_dev1_Unknown3
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC18_dev1_Unknown4
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC19_dev1_Unknown5
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC20_dev1_Unknown6
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC21_dev1_Unknown7
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC22_dev1_Unknown8
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC23_dev1_Unknown9
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AC24_dev1_Unknown10
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:MC25_dev1_Unknown11
port latency = 1024 frames
total latency = 1024 frames
properties: output,physical,terminal,
system:AP0_dev0_Unknown
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP1_dev0_Unknown0
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP2_dev0_Unknown1
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP3_dev0_Unknown2
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP4_dev0_Unknown3
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP5_dev0_Unknown4
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP6_dev0_Unknown5
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP7_dev0_Unknown6
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP8_dev0_Unknown7
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP9_dev0_Unknown8
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP10_dev0_Unknown9
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP11_dev0_Unknown10
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:MP12_dev0_Unknown11
port latency = 2048 frames
total latency = 2048 frames
properties: input,physical,terminal,
system:AP13_dev1_Unknown
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP14_dev1_Unknown0
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP15_dev1_Unknown1
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP16_dev1_Unknown2
port latency = 3072 frames
total latency = 6144 frames
properties: input,physical,terminal,
system:AP17_dev1_Unknown3
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP18_dev1_Unknown4
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP19_dev1_Unknown5
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP20_dev1_Unknown6
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP21_dev1_Unknown7
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP22_dev1_Unknown8
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP23_dev1_Unknown9
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:AP24_dev1_Unknown10
port latency = 3072 frames
total latency = 3072 frames
properties: input,physical,terminal,
system:MP25_dev1_Unknown11
port latency = 2048 frames
total latency = 2048 frames
properties: input,physical,terminal,
Qtractor:Master/in_1
port latency = 0 frames
total latency = 3072 frames
properties: input,
Qtractor:Master/in_2
port latency = 0 frames
total latency = 3072 frames
properties: input,
Qtractor:Master/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Master/out_2
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 1/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 1/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 2/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 2/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 3/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 3/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 4/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 4/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 5/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 5/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 6/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 6/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 7/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 7/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 8/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 8/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 9/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 9/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 10/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 10/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 11/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 11/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 12/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 12/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 13/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 13/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 14/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 14/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 15/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 15/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Bus 16/in_1
port latency = 0 frames
total latency = 1024 frames
properties: input,
Qtractor:Bus 16/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
Qtractor:Monitor 1/in_1
port latency = 0 frames
total latency = 3072 frames
properties: input,
Qtractor:Monitor 1/out_1
port latency = 0 frames
total latency = 3072 frames
properties: output,
[karl@client2 ~]$

11 December, 2010 - 19:55 — rncbc

Re: Finally got his output

assuming those reported physical port latencies are to be trusted, i can't see why there any simultaneous recording/capture going out of sync of each other.

however there are system input ports that show different latencies which might affect simultaneous playback, but would be only perceivable if the mix-down is being run on a outboard mixer console--could it be?

well, i'm running out of ideas... did you find any way by sliding one or more recorded clips along their tracks to let them play in perfect sync? which were the ones and how much delay/offset did you have to introduce to make them play as to hear them correct? which tracks/input ports were that recorded from? which tracks/output ports are that being played back?

uhoh, maybe that's too many questions and too much worries about a land where ardour is king ;)

seeya

Main menu

Navigation

Forum topics

Recent comments

Main menu

You are here

FW Recording with Qtractor .4.7.3

Re: FW Recording with Qtractor .4.7.3

I believe this to be a firewire issue (FFADO)

Re: I believe this to be a firewire issue (FFADO)

Two FW Devices

Finally got his output

Re: Finally got his output

Add new comment

Markdown

Filtered HTML

Plain text

Main menu

Search form

Navigation

User login

Forum topics

Recent comments

Main menu

You are here

FW Recording with Qtractor .4.7.3

Re: FW Recording with Qtractor .4.7.3

I believe this to be a firewire issue (FFADO)

Re: I believe this to be a firewire issue (FFADO)

Two FW Devices

Finally got his output

Re: Finally got his output

Add new comment

Markdown

Filtered HTML

Plain text